华硕路由器官方固件和梅林固件开机自动运行脚本方法

prtsc88 · 发表于 2022-3-18 08:58:06

我的树莓派安装monit成功，etc/monit/monitrc设置如下
untime constants:
Control file    = /etc/monit/monitrc
Log file          = /var/log/monit.log
Pid file          = /run/monit.pid
Id file          = /var/lib/monit/id
State file       = /var/lib/monit/state
Debug             = True
Log             = True
Use syslog       = False
Is Daemon       = True
Use process engine = True
Limits          = {
                  = programOutput:    512 B
                  = sendExpectBuffer:  256 B
                  = fileContentBuffer: 512 B
                  = httpContentBuffer: 1 MB
                  = networkTimeout: 5 s
                  = programTimeout: 5 m
                  = stopTimeout:    30 s
                  = startTimeout:    30 s
                  = restartTimeout: 30 s
                  = }
On reboot       = start
Poll time       = 120 seconds with start delay 0 seconds
Event queue       = base directory /var/lib/monit/events with 100 slots
Start monit httpd  = True
httpd bind address = localhost
httpd portnumber = 2812
httpd signature = Enabled
httpd auth. style  = Basic Authentication and Host/Net allow list

The service list contains the following entries:

System Name          = ubuntu
Monitoring mode    = active
On reboot          = start
使用monit -t 返回:Control file syntax OK
monit start all 返回:Cannot create socket to [localhost]:2812 -- Connection refused
# sudo ufw status
状态：激活

至                         动作       来自
-                         --       --
2812                      ALLOW    Anywhere
2812 (v6)                ALLOW    Anywhere (v6)

set httpd port 2812 and use address localhost 或者127.0.0.1 再或者0.0.0.0都显示连接失败。
请问是什么原因，拜读你的源代码中是0.0.0.0/0.0.0.0
我的monit http一直不能启动。能否告知问题所在，万分感谢!

prtsc88 · 发表于 2022-3-18 09:01:49

lsir 发表于 2022-2-22 22:45
执行monit reload，出错。syntax error 'allow'，原文：
/opt/etc/monitrc:157: syntax error 'allow'
lp@R ...

密码不能用passwd,wiki上有说明

yui678 · 发表于 2022-4-24 10:01:40

好东西！

tfy · 发表于 2022-5-13 11:49:37

请问一下，小白一枚，之前一直官固默认使用，按教程成功安装上了插件，安好后是不是会和官方usb相关应用，aicloud相冲突（就是不能开启这些功能），开启后插件失效？
还有能否介绍一下怎么设置插件？比如webdav我要在哪里输入地址端口这些、aria2离线下载ui界面怎么打开等等，之前就没接触过这些的小白，表示一头雾水。。。