RT-AX92U互联网状态：联机中断

LucidDreams

更新固件后间歇性联机中断，求助大佬看看！
固件版本：3.0.0.4.386_46061

Jul 31 03:30:31 kernel: wl0: random key value: BCF344A65029DDD65223011899D9581EAA954817F0BB0AAC096B0C28575F83F6
Jul 31 03:30:31 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 50:EC:50:1E:82:82, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Jul 31 03:30:31 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 50:EC:50:1E:82:82, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Jul 31 03:30:31 roamast: [EXAP]Deauth old sta in 0 0: 50:EC:50:1E:82:82
Jul 31 03:30:31 roamast: eth5: disconnect weak signal strength station [50:ec:50:1e:82:82]
Jul 31 03:30:31 roamast: eth5: remove client [50:ec:50:1e:82:82] from monitor list
Jul 30 23:00:41 disk_monitor: Got SIGALRM...
Jul 31 09:04:11 wlceventd: wlceventd_proc_event(527): eth6: Auth FA:23:AD:91:EF:C1, status: Successful (0), rssi:0
Jul 31 09:04:11 wlceventd: wlceventd_proc_event(537): eth6: ReAssoc FA:23:AD:91:EF:C1, status: Successful (0), rssi:-77
Jul 31 09:04:23 roamast: sta FA:23:AD:91:EF:C1 ap FC:34:97:B2:E7:F4 rcpi 66
Jul 31 09:04:23 roamast: after rssi -77
Jul 31 09:04:23 roamast: sta FA:23:AD:91:EF:C1 ap FC:34:97:B2D:54 rcpi 66
Jul 31 09:04:23 roamast: after rssi -77
Jul 31 09:08:01 kernel: wl1: random key value: 14E9D6A473BDDE830CB500D8F8991F96DC7E36190CD906BB987E6688979900C1
Jul 31 09:08:01 wlceventd: wlceventd_proc_event(508): eth6: Disassoc FA:23:AD:91:EF:C1, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Jul 31 09:08:01 wlceventd: wlceventd_proc_event(508): eth6: Disassoc FA:23:AD:91:EF:C1, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Jul 31 09:08:02 roamast: [EXAP]Deauth old sta in 1 0: FA:23:AD:91:EF:C1
Jul 31 09:08:02 roamast: eth6: disconnect weak signal strength station [fa:23:ad:91:ef:c1]
Jul 31 09:08:02 roamast: eth6: remove client [fa:23:ad:91:ef:c1] from monitor list
May  5 13:05:03 kernel: klogd started: BusyBox v1.24.1 (2022-01-05 18:44:12 CST)
May  5 13:05:03 kernel: Linux version 4.1.51 (gitserv_asus@bpza001bud) (gcc version 5.5.0 (Buildroot 2017.11.1) ) #4 SMP PREEMPT Wed Jan 5 20:31:07 CST 2022
May  5 13:05:03 kernel: CPU: AArch64 Processor [420f1000] revision 0
May  5 13:05:03 kernel: Kernel command line: coherent_pool=4M cpuidle_sysfs_switch pci=pcie_bus_safe rootwait
May  5 13:05:03 kernel: Virtual kernel memory layout:
May  5 13:05:03 kernel:     vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000   (   247 GB)
May  5 13:05:03 kernel:     vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000   (     7 GB maximum)
May  5 13:05:03 kernel:               0xffffffbe00000000 - 0xffffffbe00700000   (     7 MB actual)
May  5 13:05:03 kernel:     fixed   : 0xffffffbffabfd000 - 0xffffffbffac00000   (    12 KB)
May  5 13:05:03 kernel:     PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
May  5 13:05:03 kernel:     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
May  5 13:05:03 kernel:     memory  : 0xffffffc000000000 - 0xffffffc020000000   (   512 MB)
May  5 13:05:03 kernel:       .init : 0xffffffc0006b3000 - 0xffffffc0006eb000   (   224 KB)
May  5 13:05:03 kernel:       .text : 0xffffffc000080000 - 0xffffffc0006b21f4   (  6345 KB)
May  5 13:05:03 kernel:       .data : 0xffffffc0006ec000 - 0xffffffc0007b5600   (   806 KB)
May  5 13:05:03 kernel: init_timers: timer_function_timeout virt addr 0xffffffc000704d88
May  5 13:05:03 kernel: creating mapping for reserved memory phys 0x0a600000 virt 0xffffffc00a600000 size 0x00e00000 for dhd0
May  5 13:05:03 kernel: creating mapping for reserved memory phys 0x09800000 virt 0xffffffc009800000 size 0x00e00000 for dhd1
May  5 13:05:03 kernel: creating mapping for reserved memory phys 0x08a00000 virt 0xffffffc008a00000 size 0x00e00000 for dhd2
May  5 13:05:03 kernel: Do not need to create mapping for reserved memory phys 0x0e000000 size 0x02000000 for buffer
May  5 13:05:03 kernel: creating mapping for reserved memory phys 0x0b400000 virt 0xffffffc00b400000 size 0x02c00000 for flow
May  5 13:05:03 kernel: pmc_initMC using DQM mode
May  5 13:05:03 kernel: Successfully retrieved NVRAM data from dtb
May  5 13:05:03 kernel: cfe-v^A: 1.0.38-163.181
May  5 13:05:03 kernel: CPU1: Booted secondary processor
May  5 13:05:03 kernel: ERROR: could not append enough serial LEDs
May  5 13:05:03 kernel: Broadcom Logger v0.1
May  5 13:05:03 kernel: skb_free_task created successfully with start budget 256
May  5 13:05:03 kernel: net_dev_init: process_backlog_timeout virt addr 0xffffffc0007a77b0
May  5 13:05:03 kernel: gbpm_do_work scheduled
May  5 13:05:03 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m
May  5 13:05:03 kernel: BLOG Rule v1.0 Initialized
May  5 13:05:03 kernel: Broadcom IQoS v1.0 initialized
May  5 13:05:03 kernel: Broadcom GBPM v0.1 initialized
May  5 13:05:03 kernel: >>>>> For primary mtd partition rootfs, cferam/vmlinux.lz mounted as JFFS2, vmlinux fs mounted as UBIFS <<<<<
May  5 13:05:03 kernel: Secondary mtd partition rootfs_update detected as JFFS2 for cferam/vmlinux source and UBIFS for vmlinux filesystem
May  5 13:05:03 kernel: setup_mtd_parts: misc indx 2 name misc3 nvram configured size 1
May  5 13:05:03 kernel: setup_mtd_parts: name misc3 configured size 0x00100000 offset 0xF600000
May  5 13:05:03 kernel: setup_mtd_parts: misc indx 1 name misc2 nvram configured size 63
May  5 13:05:03 kernel: setup_mtd_parts: name misc2 configured size 0x03f00000 offset 0xB700000
May  5 13:05:03 kernel: setup_mtd_parts: misc indx 0 name misc1 nvram configured size 8
May  5 13:05:03 kernel: setup_mtd_parts: name misc1 configured size 0x00800000 offset 0xAF00000
May  5 13:05:03 kernel: Creating 11 MTD partitions on "brcmnand.0":
May  5 13:05:03 kernel: 0x000005d20000-0x00000af00000 : "rootfs"
May  5 13:05:03 kernel: 0x000000620000-0x000005800000 : "rootfs_update"
May  5 13:05:03 kernel: 0x00000f700000-0x00000ff00000 : "data"
May  5 13:05:03 kernel: 0x000000000000-0x000000100000 : "nvram"
May  5 13:05:03 kernel: 0x000000100000-0x000005800000 : "image_update"
May  5 13:05:03 kernel: 0x000005800000-0x00000af00000 : "image"
May  5 13:05:03 kernel: 0x000005800000-0x000005d00000 : "bootfs"
May  5 13:05:03 kernel: 0x000000100000-0x000000600000 : "bootfs_update"
May  5 13:05:03 kernel: 0x00000f600000-0x00000f700000 : "misc3"
May  5 13:05:03 kernel: 0x00000b700000-0x00000f600000 : "misc2"
May  5 13:05:03 kernel: 0x00000af00000-0x00000b700000 : "misc1"
May  5 13:05:03 kernel: brcmboard registered
May  5 13:05:03 kernel: brcmboard: brcm_board_init entry
May  5 13:05:03 kernel: print_rst_status: Last RESET due to POR reset
May  5 13:05:03 kernel: print_rst_status: RESET reason: 0x00000000
May  5 13:05:03 kernel: DYING GASP IRQ Initialized and Enabled
May  5 13:05:03 kernel: map_hw_timer_interrupt,127: interrupt_id 22
May  5 13:05:03 kernel: map_hw_timer_interrupt,127: interrupt_id 23
May  5 13:05:03 kernel: map_hw_timer_interrupt,127: interrupt_id 24
May  5 13:05:03 kernel: map_hw_timer_interrupt,127: interrupt_id 25
May  5 13:05:03 kernel: Registering button 0 (ffffffc0008057a8) (bpGpio: 00008017, bpExtIrq:00000000 (0))
May  5 13:05:03 kernel:     extIrqIdx:0, gpioNum:23 ACTIVE LOW
May  5 13:05:03 kernel: Registering button 1 (ffffffc000805868) (bpGpio: 00008016, bpExtIrq:00000001 (1))
May  5 13:05:03 kernel:     extIrqIdx:1, gpioNum:22 ACTIVE LOW
May  5 13:05:03 kernel: bcm_i2c: i2c bus 0 polling mode (mod_abs_gpio 255)
May  5 13:05:03 kernel: BPM: tot_mem_size=536870912B (512MB),
May  5 13:05:03 kernel: bcm_i2c: bus 0: module inserted
May  5 13:05:03 kernel: buf_mem_size <15%> =80530635B (76MB), num of buffers=28597, buf size=2816
May  5 13:05:03 kernel: Broadcom BPM Module Char Driver v0.1 Registered<3004>^[[0m
May  5 13:05:03 kernel: ^[[0;34m[NTC bpm] bpm_module_init: tot_mem_pool=1244 mem_idx:1244^[[0m
May  5 13:05:03 kernel: ubi0: attaching mtd0
May  5 13:05:03 kernel: ubi0: scanning is finished
May  5 13:05:03 kernel: ubi0: attached mtd0 (name "rootfs", size 81 MiB)
May  5 13:05:03 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:03 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:03 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:03 kernel: ubi0: good PEBs: 655, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:03 kernel: ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:03 kernel: ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 911708568
May  5 13:05:03 kernel: ubi0: available PEBs: 0, total reserved PEBs: 655, PEBs reserved for bad PEB handling: 13
May  5 13:05:03 kernel: ubi0: background thread "ubi_bgt0d" started, PID 59
May  5 13:05:03 kernel: UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs_ubifs", R/O mode
May  5 13:05:03 kernel: UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:03 kernel: UBIFS (ubi0:0): FS size: 79613952 bytes (75 MiB, 627 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
May  5 13:05:03 kernel: UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
May  5 13:05:03 kernel: UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID EFCE4C6A-F7B6-41CA-91CF-6E74D88736F8, small LPT model
May  5 13:05:03 kernel: jffs2: notice: (81) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
May  5 13:05:03 kernel: jffs2: notice: (144) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
May  5 13:05:03 kernel: wlcsm: module license 'Proprietary' taints kernel.
May  5 13:05:03 kernel: Disabling lock debugging due to kernel taint
May  5 13:05:03 kernel: bm_base_addr 0xffffffc00e000000, size 33554432, bm_base_addr_phys 0x000000000e000000
May  5 13:05:03 kernel: fm_base_addr 0xffffffc00b400000, size 46137344, fm_base_addr_phys 0x000000000b400000
May  5 13:05:03 kernel: RDP Physical address=0x82200000 Virtual address = 0xffffff8000b80000
May  5 13:05:03 kernel: configure_runner: NATC keysize 0x100070 key element size 16 contextsize 0x400000 context element size 64
May  5 13:05:03 kernel: ++++Runner gso_desc_pool created successfully
May  5 13:05:03 kernel: rdd_init_params.runner_nat_cache_key_ptr=0xffffffc00bd00000
May  5 13:05:03 kernel: rdd_init_params.runner_nat_cache_context_ptr=0xffffffc00b400000
May  5 13:05:03 kernel: rdd_init_params.runner_context_cont_ptr=0xffffffc00b800000
May  5 13:05:03 kernel: FPM_BPM phy_addr 0x82c30000,virt_addr 0xffffff8000862000
May  5 13:05:03 kernel:  RDP PKT memory = 32MB : Max Possible Bufs <16384> of size <2048>; Allocating <15360> bufs; RDP enum <5>
May  5 13:05:03 kernel: brcmchipinfo: brcm_chipinfo_init entry
May  5 13:05:03 kernel: NBUFF v1.0 Initialized
May  5 13:05:03 kernel: npe_max_ent<32768> npe_ht_ent<8192>
May  5 13:05:03 kernel: ^[[0;36;44mTotal # of labels = 67^[[0m
May  5 13:05:03 kernel: ^[[0;36;44mInitialized fcache state^[[0m
May  5 13:05:03 kernel: ^[[0;36;44mBroadcom Packet Flow Cache  Char Driver v4.0 Registered<3002>^[[0m
May  5 13:05:03 kernel: fc_timer_task created successfully
May  5 13:05:03 kernel: Created Proc FS /procfs/fcache
May  5 13:05:03 kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
May  5 13:05:03 kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
May  5 13:05:03 kernel: ^[[0;35m[FHW]  pktDbgLvl[0xffffffbffc3f9e08]=0^[[0m
May  5 13:05:03 kernel: ^[[0;34m[FHW]  fhw_construct: ^[[0m
May  5 13:05:03 kernel: ^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m
May  5 13:05:03 kernel: flwStatsThread created. numFlwsPerPoll 546 maxFlwIdx 16383
May  5 13:05:03 kernel: ^[[0;36;44mFcache Pathstats created^[[0m
May  5 13:05:03 kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m
May  5 13:05:03 kernel: crossbar[0]: Allocated cb_idx=0 int_ep=1
May  5 13:05:03 kernel: crossbar[0]: Add cb_idx=0 ext_ep=1 GPHY:12
May  5 13:05:03 kernel: crossbar Mux: connect cb_idx:0  int_ep 0 to ext_ep 2
May  5 13:05:03 kernel: crossbar Mux: connect cb_idx:0  int_ep 1 to ext_ep 1
May  5 13:05:03 kernel: NOTE: Using Port Grouping for IMP ports : [ 0 --> 4 ] [ 1, 2 --> 5 ] [ 3 --> 8 ]
May  5 13:05:03 kernel: LAG/Trunking enabled <0x08>
May  5 13:05:03 kernel: eth0: <Int sw port: 3> <Logical : 03> MAC : FC:34:97:B2:E7:F0
May  5 13:05:03 kernel:     Chip Physical Port 10, Cross Bar Port 1, PHY_ID <0x0007f00c:0x0c:On-chip GPHY >
May  5 13:05:03 kernel: eth1: <Ext sw port: 0> <Logical : 08> PHY_ID <0x0007f008:0x08:On-chip GPHY> MAC:FC:34:97:B2:E7:F0
May  5 13:05:03 kernel: eth2: <Ext sw port: 1> <Logical : 09> PHY_ID <0x0007f009:0x09:On-chip GPHY> MAC:FC:34:97:B2:E7:F0
May  5 13:05:03 kernel: eth3: <Ext sw port: 2> <Logical : 10> PHY_ID <0x0007f00a:0x0a:On-chip GPHY> MAC:FC:34:97:B2:E7:F0
May  5 13:05:03 kernel: eth4: <Ext sw port: 3> <Logical : 11> PHY_ID <0x0007f00b:0x0b:On-chip GPHY> MAC:FC:34:97:B2:E7:F0
May  5 13:05:03 kernel: ===> Activate Deep Green Mode
May  5 13:05:03 kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
May  5 13:05:03 kernel: Broadcom Command List Driver v1.0
May  5 13:05:03 kernel: Initialized Runner Host Layer
May  5 13:05:03 kernel: Initialized Runner Unicast Layer
May  5 13:05:03 kernel: Initialized Runner L2 Unicast Layer
May  5 13:05:03 kernel: Initialized Runner Multicast Layer
May  5 13:05:03 kernel: Retrieve num_fhw_path=64
May  5 13:05:03 kernel: ^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m
May  5 13:05:03 kernel: Enabled Runner binding to Flow Cache
May  5 13:05:03 kernel: Initialized Runner Protocol Layer (800)
May  5 13:05:03 kernel: Broadcom Runner Blog Driver Char Driver v0.1 Registered <3009>
May  5 13:05:03 kernel: PCIe HCD (impl1)^M
May  5 13:05:03 kernel: core [0] probe^M
May  5 13:05:03 kernel:   bcm963xx-pcie: found port [0] GEN2 Core Rev [3.04] with 2 Lanes^M
May  5 13:05:03 kernel:   bcm963xx-pcie: Core [0] setting resistor calibration value to 0x9
May  5 13:05:03 kernel:   bcm963xx-pcie: core [0] Link UP - [1] lanes, [GEN2] speed^M
May  5 13:05:03 kernel:   bcm963xx-pcie: Core [0] Enabled PCIE/UBUS Error Interrupts^M
May  5 13:05:03 kernel:   bcm963xx-pcie: Core [0] UBUS Intr [UBUS_LINKUP]^M
May  5 13:05:03 kernel: pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
May  5 13:05:03 kernel: pci 0000:01:00.0: of_irq_parse_pci() failed with rc=-22
May  5 13:05:03 kernel: core [1] probe^M
May  5 13:05:03 kernel:   bcm963xx-pcie: found port [1] GEN2 Core Rev [3.04] with 1 Lanes^M
May  5 13:05:03 kernel:   bcm963xx-pcie: Core [1] setting resistor calibration value to 0x9
May  5 13:05:03 kernel:   bcm963xx-pcie: core [1] Link UP - [1] lanes, [GEN2] speed^M
May  5 13:05:03 kernel:   bcm963xx-pcie: Core [1] Enabled PCIE/UBUS Error Interrupts^M
May  5 13:05:03 kernel:   bcm963xx-pcie: Core [1] UBUS Intr [UBUS_LINKUP]^M
May  5 13:05:03 kernel: pci 0001:00:00.0: of_irq_parse_pci() failed with rc=-22
May  5 13:05:03 kernel: pci 0001:01:00.0: of_irq_parse_pci() failed with rc=-22
May  5 13:05:03 kernel: core [2] probe^M
May  5 13:05:03 kernel:   bcm963xx-pcie: found port [2] GEN2 Core Rev [3.04] with 1 Lanes^M
May  5 13:05:03 kernel:   bcm963xx-pcie: Core [2] setting resistor calibration value to 0x9
May  5 13:05:03 kernel:   bcm963xx-pcie: core [2] Link UP - [1] lanes, [GEN2] speed^M
May  5 13:05:03 kernel:   bcm963xx-pcie: Core [2] Enabled PCIE/UBUS Error Interrupts^M
May  5 13:05:03 kernel:   bcm963xx-pcie: Core [2] UBUS Intr [UBUS_LINKUP]^M
May  5 13:05:03 kernel: pci 0002:00:00.0: of_irq_parse_pci() failed with rc=-22
May  5 13:05:03 kernel: pci 0002:01:00.0: of_irq_parse_pci() failed with rc=-22
May  5 13:05:03 kernel: ^[[1m^[[34mWifi Forwarding Driver is initialized!^[[0m
May  5 13:05:03 kernel: broadcomThermalDrv brcm-therm: init (CPU count 2 2 2 2)
May  5 13:05:03 kernel: ubi1: attaching mtd10
May  5 13:05:03 kernel: ubi1: scanning is finished
May  5 13:05:03 kernel: ubi1: attached mtd10 (name "misc1", size 8 MiB)
May  5 13:05:03 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:03 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:03 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:03 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:03 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:03 kernel: ubi1: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 60959913
May  5 13:05:03 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May  5 13:05:03 kernel: ubi1: background thread "ubi_bgt1d" started, PID 341
May  5 13:05:03 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 357
May  5 13:05:03 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram"
May  5 13:05:03 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:03 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
May  5 13:05:03 kernel: UBIFS (ubi1:0): reserved for root: 0 bytes (0 KiB)
May  5 13:05:03 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 44C278E6-DDEB-4A0A-B92A-8E3CD8F08EAD, small LPT model
May  5 13:05:03 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May  5 13:05:03 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" stops
May  5 13:05:03 kernel: ubi1: detaching mtd10
May  5 13:05:03 kernel: ubi1: mtd10 is detached
May  5 13:05:03 kernel: jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
May  5 13:05:03 kernel: Loading HND Module
May  5 13:05:03 kernel: Wait Instruction is disabled
May  5 13:05:03 kernel: igs_module_init:867:         IGS 18 create network socket successful
May  5 13:05:03 kernel: dpsta_init: msglevel set to 0x1
May  5 13:05:03 kernel: wl_module_init: passivemode set to 0x1
May  5 13:05:03 kernel: wl_module_init: txworkq set to 0x0
May  5 13:05:03 kernel: bcm43684_nic 0 devid 0x4360
May  5 13:05:03 kernel: BME M2M core not available
May  5 13:05:03 kernel: wl0: wlc_ap_attach dynamic_ed_thresh_enable = 0
May  5 13:05:03 kernel: wl0 taf_do_enable: TAF is enabled
May  5 13:05:03 kernel: Creating CPU ring for queue number 0 with 1024 packets descriptor=0xffffffbffc54b8c0
May  5 13:05:03 kernel:  Creating CPU ring for queue number 1 with 1024 packets descriptor=0xffffffbffc54b900
May  5 13:05:03 kernel:  ^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 0 wl_radio_idx 0 Type skb configured WFD thread wfd0-thrd minQId/maxQId (8/9), status (0) qmask 0x3^[[0m
May  5 13:05:03 kernel: Instantiating WFD 0 thread
May  5 13:05:03 kernel: wfd_registerdevice Successfully registered dev eth5 ifidx 0 wfd_idx 0
May  5 13:05:03 kernel: eth5: Broadcom BCM4360 802.11 Wireless Controller 17.10.121.41 (r796515)
May  5 13:05:03 kernel: bcm43684_nic 0 devid 0x4360
May  5 13:05:03 kernel: BME M2M core not available
May  5 13:05:03 kernel: wl1: wlc_ap_attach dynamic_ed_thresh_enable = 0
May  5 13:05:03 kernel: wl1 taf_do_enable: TAF is enabled
May  5 13:05:03 kernel: Creating CPU ring for queue number 2 with 1024 packets descriptor=0xffffffbffc54b940
May  5 13:05:03 kernel:  Creating CPU ring for queue number 3 with 1024 packets descriptor=0xffffffbffc54b980
May  5 13:05:03 kernel:  ^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 1 wl_radio_idx 1 Type skb configured WFD thread wfd1-thrd minQId/maxQId (10/11), status (0) qmask 0xc^[[0m
May  5 13:05:03 kernel: Instantiating WFD 1 thread
May  5 13:05:03 kernel: wfd_registerdevice Successfully registered dev eth6 ifidx 0 wfd_idx 1
May  5 13:05:03 kernel: eth6: Broadcom BCM4360 802.11 Wireless Controller 17.10.121.41 (r796515)
May  5 13:05:03 kernel: bcm43684_nic 0 devid 0xaaa4
May  5 13:05:03 kernel: skip probing ax chip in wl, devid 0xaaa4
May  5 13:05:03 kernel: DHD_FKB_POOL size is:1280 and entry size:2816
May  5 13:05:03 kernel: DHD_PKTTAG POOL size is:2592 and entry size:128
May  5 13:05:03 kernel: PCI_PROBE:  bus 1, slot 0,vendor 14E4, device AAA4(good PCI location)
May  5 13:05:03 kernel: dor2: runner supported ring format types TxP 0x5, RxP 0x3 TxC 0x3 RxC 0x3^M
May  5 13:05:03 kernel: dhd_runner_attach: Tx Offload - Enabled, Ring Size = 1024
May  5 13:05:03 kernel: dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
May  5 13:05:03 kernel: TX wakeup info: reg = <0x82299004>, val = <0x12000000>
May  5 13:05:03 kernel: RX wakeup info: reg = <0x8229a004>, val = <0x2a000000>
May  5 13:05:03 kernel: dhd_attach(): thread:dhd_watchdog_thread:2d3 started
May  5 13:05:03 kernel: Creating CPU ring for queue number 4 with 1024 packets descriptor=0xffffffbffc54b9c0
May  5 13:05:03 kernel:  Creating CPU ring for queue number 5 with 1024 packets descriptor=0xffffffbffc54ba00
May  5 13:05:03 kernel:  ^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 2 wl_radio_idx 2 Type fkb configured WFD thread wfd2-thrd minQId/maxQId (12/13), status (0) qmask 0x30^[[0m
May  5 13:05:03 kernel: Instantiating WFD 2 thread
May  5 13:05:03 kernel: dor2: MSG Ring format set to 1
May  5 13:05:03 kernel: dhd_runner_flowmgr_init: dhd2_rnr bootmem addr<ffffffc008a00000> size<14680064>
May  5 13:05:03 kernel: dhd_runner_profile_init: N+M profile = 3 01:1024/0512 -1:2048/1024 -1:1024/0512 -1:0512/0512 00:0512/0512
May  5 13:05:03 kernel: dhd_runner_policy_init: N+M Policy = 0 1 (HW)
May  5 13:05:03 kernel: ^[[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0xaaa4> bus<1> slot<0>^[[0m
May  5 13:05:03 kernel: Initial configuration
May  5 13:05:03 kernel: =================================
May  5 13:05:03 kernel:         rx_post_flow_ring_base_addr : ffffffc0134ec000
May  5 13:05:03 kernel:         tx_post_flow_ring_base_addr : ffffffc0089d8000
May  5 13:05:03 kernel:         rx_complete_flow_ring_base_addr : ffffffc0134f0000
May  5 13:05:03 kernel:         tx_complete_flow_ring_base_addr : ffffffc0134ee000
May  5 13:05:03 kernel:         r2d_wr_arr_base_addr : ffffff8001803000
May  5 13:05:03 kernel:         d2r_rd_arr_base_addr : ffffff8001803802
May  5 13:05:03 kernel:         r2d_rd_arr_base_addr : ffffff8001804000
May  5 13:05:03 kernel:         d2r_wr_arr_base_addr : ffffff8001803c02
May  5 13:05:03 kernel:         tx_post_mgmt_arr_base_addr : ffffff8001804800
May  5 13:05:03 kernel:         tx_post_mgmt_arr_base_phys_addr : 0x147d9800
May  5 13:05:03 kernel:         r2d_wr_arr_base_phys_addr : 0x147d8000
May  5 13:05:03 kernel:         d2r_rd_arr_base_phys_addr : 0x147d8802
May  5 13:05:03 kernel:         r2d_rd_arr_base_phys_addr : 0x147d9000
May  5 13:05:03 kernel:         d2r_wr_arr_base_phys_addr : 0x147d8c02
May  5 13:05:03 kernel:         Doorbell Post Wakeup register : phy_addr: 0xe0802160, virt_addr: ffffff8001982160
May  5 13:05:03 kernel:         Doorbell Complete Wakeup register : phy_addr: 0xe0802164, virt_addr: ffffff8001982164
May  5 13:05:03 kernel:         Doorbell ISR : ffffffbffcdabd80
May  5 13:05:03 kernel:         Doorbell CTX : ffffffc013f9cc00
May  5 13:05:03 kernel:         flow_ring_format : 1
May  5 13:05:03 kernel:         idma_active : 1
May  5 13:05:03 kernel: Backup queue configuration:
May  5 13:05:03 kernel: ========================================
May  5 13:05:03 kernel: Base virt address = ffffffc00df00000, physical address =  DF00000
May  5 13:05:03 kernel: Index stack virt address = ffffffc00dfe38c0, physical address =  DFE38C0
May  5 13:05:03 kernel: Backup queue entries: total = 58250  shared by all radios
May  5 13:05:03 kernel: ========================================
May  5 13:05:03 kernel: Creating CPU ring for queue number 2 with 128 packets descriptor=0xffffffbffc2c9900, size_of_entry 16
May  5 13:05:03 kernel: Done initializing Ring 2 Base=0xffffff80003e3000 End=0xffffff80003e3800 calculated entries= 128 RDD Base=1e012000K descriptor=0xffffffbffc2c9900
May  5 13:05:03 kernel: ^[[0;33;40mRunner DHD Offload initialization complete^[[0m
May  5 13:05:03 kernel: Dongle Host Driver, version 17.10.121.41 (r796515)
May  5 13:05:03 kernel: Compiled in drivers/net/wireless/bcmdhd
May  5 13:05:03 kernel: wfd_registerdevice Successfully registered dev eth7 ifidx 0 wfd_idx 2
May  5 13:05:03 kernel: Register interface [eth7]  MAC: fc:34:97:b2:e7:f8
May  5 13:05:03 kernel: random: init urandom read with 14 bits of entropy available
May  5 13:05:03 kernel: proc_dostring_crashlogsave:  crash log filename is /jffs/crashlog.log
May  5 13:05:03 kernel: crashFileSet: log signature invalid !
May  5 13:05:03 kernel: ret 0 retlen 65536 buff <6>device eth1 entered promiscuous mode
May  5 13:05:03 kernel: wl0: chanspec: 0x190a (12u)
May  5 13:05:03 kernel: wl1: chanspec: 0xe22a (44/80)
May  5 13:05:07 acsd: eth5: Selecting 2g band ACS policy
May  5 13:05:07 wlceventd: main(961): wlceventd Start...
May  5 13:05:07 RT-AX92U: start https:8443
May  5 13:05:07 RT-AX92U: start httpd:80
May  5 13:05:07 avahi-daemon[1306]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
May  5 13:05:07 httpd: Save SSL certificate...80
May  5 13:05:07 httpd: mssl_cert_key_match : PASS
May  5 13:05:07 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link UP at 1000 mbps full duplex
May  5 13:05:07 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) (phyId: b) Link UP at 1000 mbps full duplex
May  5 13:05:07 disk monitor: be idle
May  5 13:05:07 jffs2: valid logs(1)
May  5 13:05:07 hour monitor: daemon is starting
May  5 13:05:07 hour monitor: daemon terminates
May  5 13:05:07 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
May  5 13:05:07 miniupnpd[1423]: HTTP listening on port 52293
May  5 13:05:07 Mastiff: init
May  5 13:05:07 ERP: The model isn't under EU SKU!
May  5 13:05:08 miniupnpd[1423]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 13:05:08 lldpd[1474]: cannot get ethtool link information with GLINKSETTINGS (requires 4.9+): Operation not permitted
May  5 13:05:08 avahi-daemon[1306]: Alias name "RT-AX92U" successfully established.
May  5 13:05:08 kernel: <=== Deactivate Deep Green Mode
May  5 13:05:09 WAN Connection: WAN(0) link down.
May  5 13:05:09 kernel: NOHZ: local_softirq_pending 08
May  5 13:05:09 kernel: NOHZ: local_softirq_pending 08
May  5 13:05:09 kernel: NOHZ: local_softirq_pending 08
May  5 13:05:09 kernel: NOHZ: local_softirq_pending 08
May  5 13:05:09 kernel: NOHZ: local_softirq_pending 08
May  5 13:05:09 kernel: NOHZ: local_softirq_pending 08
May  5 13:05:09 kernel: NOHZ: local_softirq_pending 08
May  5 13:05:09 kernel: NOHZ: local_softirq_pending 08
May  5 13:05:09 kernel: NOHZ: local_softirq_pending 08
May  5 13:05:09 kernel: NOHZ: local_softirq_pending 08
May  5 13:05:10 kernel: port_generic_open 536 skip turnning on power on eth0 here
May  5 13:05:10 kernel: SCSI subsystem initialized
May  5 13:05:10 modprobe: module scsi_wait_scan not found in modules.dep
May  5 13:05:10 modprobe: module mbcache not found in modules.dep
May  5 13:05:10 modprobe: module jbd not found in modules.dep
May  5 13:05:10 modprobe: module ext3 not found in modules.dep
May  5 13:05:10 modprobe: module ext4 not found in modules.dep
May  5 13:05:10 modprobe: module ext2 not found in modules.dep
May  5 13:05:10 kernel: tfat: loading out-of-tree module taints kernel.
May  5 13:05:10 modprobe: module btusbdrv not found in modules.dep
May  5 13:05:10 init: fwver: 3.0.0.4_386_46061-g9a06866 (sn: /ha:FC:34:97:B2:E7:F0 )
May  5 13:05:10 ahs: [read_json]Update ahs JSON file.
May  5 13:05:11 acsd: eth5: COEX: downgraded chanspec 0x190a (12) to 0x100c (12): channel 6 used by exiting BSSs
May  5 13:05:11 acsd: eth5: selected channel spec: 0x100c (12)
May  5 13:05:11 acsd: eth5: Adjusted channel spec: 0x100c (12)
May  5 13:05:11 acsd: eth5: selected channel spec: 0x100c (12)
May  5 13:05:11 acsd: acs_set_chspec: 0x100c (12) for reason APCS_INIT
May  5 13:05:11 kernel: wl0: chanspec: 0x100c (12)
May  5 13:05:11 wlceventd: wlceventd_proc_event(527): eth6: Auth 64:64:4A:6A:AB:0C, status: Successful (0), rssi:0
May  5 13:05:11 wlceventd: wlceventd_proc_event(556): eth6: Assoc 64:64:4A:6A:AB:0C, status: Successful (0), rssi:-75
May  5 13:05:13 wlceventd: wlceventd_proc_event(527): eth5: Auth 04:CF:8C:61:C4:79, status: Successful (0), rssi:0
May  5 13:05:13 wlceventd: wlceventd_proc_event(556): eth5: Assoc 04:CF:8C:61:C4:79, status: Successful (0), rssi:-72
May  5 13:05:14 kernel: eth0 (Int switch port: 3) (Logical Port: 3) (phyId: c) Link UP at 1000 mbps full duplex
May  5 13:05:14 wlceventd: wlceventd_proc_event(527): eth5: Auth 50:EC:50:1E:82:82, status: Successful (0), rssi:0
May  5 13:05:14 wlceventd: wlceventd_proc_event(556): eth5: Assoc 50:EC:50:1E:82:82, status: Successful (0), rssi:-49
May  5 13:05:15 kernel: wl1: random key value: 53C16147C62AEEB2406B02663ECEA1F0452CF4B2F14E0384442E5F1C222B1D5A
May  5 13:05:15 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 64:64:4A:6A:AB:0C, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
May  5 13:05:17 BONDING: option disabled
May  5 13:05:17 roamast: ROAMING Start...
May  5 13:05:18 kernel: random: nonblocking pool is initialized
May  5 13:05:18 httpd: Succeed to init SSL certificate...80
May  5 13:05:18 httpd: Succeed to init SSL certificate...8443
May  5 13:05:18 wan: finish adding multi routes
May  5 13:05:19 wlceventd: wlceventd_proc_event(527): eth6: Auth 64:64:4A:6A:AB:0C, status: Successful (0), rssi:-78
May  5 13:05:19 wlceventd: wlceventd_proc_event(556): eth6: Assoc 64:64:4A:6A:AB:0C, status: Successful (0), rssi:-78
May  5 13:05:19 miniupnpd[1423]: shutting down MiniUPnPd
May  5 13:05:19 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
May  5 13:05:19 miniupnpd[2300]: HTTP listening on port 43468
May  5 13:05:19 miniupnpd[2300]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 13:05:20 kernel: wl0: random key value: 91CE44EC4ED3023B588F006211A704FEE02ECBE86B7B01691C8A606B6605F416
May  5 13:05:20 wlceventd: wlceventd_proc_event(491): eth5: Deauth_ind 50:EC:50:1E:82:82, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
May  5 13:05:21 wlceventd: wlceventd_proc_event(527): eth5: Auth EC:4D:3E:41:AE:FE, status: Successful (0), rssi:0
May  5 13:05:22 wlceventd: wlceventd_proc_event(527): eth5: Auth 50:EC:50:1E:82:82, status: Successful (0), rssi:0
May  5 13:05:22 wlceventd: wlceventd_proc_event(556): eth5: Assoc 50:EC:50:1E:82:82, status: Successful (0), rssi:-49
May  5 13:05:22 WAN Connection: WAN was restored.
May  5 13:05:24 ntp: start NTP update
Jul 31 09:10:50 rc_service: ntp 2274:notify_rc restart_diskmon
Jul 31 09:10:50 disk_monitor: Finish
Jul 31 09:10:51 disk monitor: be idle
Jul 31 09:10:51 start_ddns: update WWW.ASUS.COM update@asus.com, wan_unit 0
Jul 31 09:10:51 start_ddns: Clear ddns cache.
Jul 31 09:10:51 start_ddns: Start Inadyn(10).
Jul 31 09:10:51 inadyn[2418]: In-a-dyn version 2.8.1 -- Dynamic DNS update client.
Jul 31 09:10:51 dhcp client: bound 192.168.1.2/255.255.255.0 via 192.168.1.1 for 86400 seconds.
Jul 31 09:10:51 inadyn[2418]: Failed resolving hostname AC84D5A0FAAF20F86CAB42CD88204AA74.asuscomm.com: Name or service not known
Jul 31 09:10:51 inadyn[2418]: Update forced for alias AC84D5A0FAAF20F86CAB42CD88204AA74.asuscomm.com, new IP# 192.168.1.2
Jul 31 09:10:51 inadyn[2418]: alias address=<192.168.1.2>
Jul 31 09:10:51 inadyn[2418]: request<GET /ddns/update.jsp?hostname=AC84D5A0FAAF20F86CAB42CD88204AA74.asuscomm.com&myip=192.168.1.2&model=RT-AX92U&fw_ver=3.0.0.4.386_46061-g9a06866 HTTP/1.0^M Authorization: Basic RkMzNDk3QjJFN0YwOjZGQ0U5QzJENEY1RDEzQzczQkM5RDkwNDMyMzBDNjNC^M Host: ns1.asuscomm.com^M User-Agent: inadyn/2.8.1 https://github.com/troglobit/inadyn/issues^M ^M >
Jul 31 09:10:56 wlceventd: wlceventd_proc_event(508): eth5: Disassoc EC:4D:3E:41:AE:FE, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Jul 31 09:10:56 wlceventd: wlceventd_proc_event(508): eth5: Disassoc EC:4D:3E:41:AE:FE, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Jul 31 09:11:07 inadyn[2418]: [response_update]HTTP/1.1 299 |Invalid IP format| 192.168.1.2^M Date: Sun, 31 Jul 2022 01:10:52 GMT^M Server: Apache^M Content-Length: 0^M Content-Type: text/html; charset=UTF-8^M ^M
Jul 31 09:11:07 inadyn[2418]: Invalid IP address
Jul 31 09:11:07 inadyn[2418]: Fatal error in DDNS server response:
Jul 31 09:11:07 inadyn[2418]: [299 |Invalid IP format| 192.168.1.2]
Jul 31 09:11:26 crond[1291]: time disparity of 2228886 minutes detected
Jul 31 09:11:54 kernel: bcm_i2c: bus 0: Failed to detect SFP: 100 retries exhausted
Jul 31 09:12:33 WATCHDOG: [FAUPGRADE][auto_firmware_check7419)]periodic_check AM 5:12
Jul 31 09:12:33 WATCHDOG: [FAUPGRADE][auto_firmware_check7458)]do webs_update
Jul 31 09:12:35 WATCHDOG: [FAUPGRADE][auto_firmware_check7476)]retrieve firmware information
Jul 31 09:12:35 WATCHDOG: [FAUPGRADE][auto_firmware_check7479)]user in use
Jul 31 09:12:48 ahs: [read_json]Update ahs JSON file.
Jul 31 09:13:05 WATCHDOG: [FAUPGRADE][auto_firmware_check7458)]do webs_update
Jul 31 09:13:05 WATCHDOG: [FAUPGRADE][auto_firmware_check7476)]retrieve firmware information
Jul 31 09:13:05 WATCHDOG: [FAUPGRADE][auto_firmware_check7479)]user in use
Jul 31 09:13:35 WATCHDOG: [FAUPGRADE][auto_firmware_check7458)]do webs_update
Jul 31 09:13:35 WATCHDOG: [FAUPGRADE][auto_firmware_check7476)]retrieve firmware information
Jul 31 09:13:35 WATCHDOG: [FAUPGRADE][auto_firmware_check7479)]user in use

微信扫一扫，阅读更方便^_^

LucidDreams

完整的日志

Master

如果是状态显示问题，不影响你正常使用的话，请先忽略。这种情况应该是固件的问题。

LucidDreams

Master 发表于 2022-8-1 17:55
如果是状态显示问题，不影响你正常使用的话，请先忽略。这种情况应该是固件的问题。 ...

已经影响到了，每次都需要重启路由器才能重新连接网络。

iphone8

LucidDreams 发表于 2022-8-1 19:51
已经影响到了，每次都需要重启路由器才能重新连接网络。

出现联机中断时，无线或有线设备可以访问互联网吗？如果能正常访问，说明当前的判断互联网状态机种出现问题了,等待官方修正。如果不能访问互联网，这就比较麻烦一点，需要重启，或者你观察看看是不是固定时间出现这种现象，如果是的话可以设置定时重启解决一下，待官方修正。

Master

LucidDreams 发表于 2022-8-1 19:51
已经影响到了，每次都需要重启路由器才能重新连接网络。

RT-AX92U的WAN那边，做了什么特殊设定？或者开了什么功能吗？