Merlin--HGG 380.65.8-FINAL

Master · 发表于 2017-6-19 11:49:43

若想下载 Merlin by HGG 当前固件，请跟帖回复您的邮箱，跟帖格式如下
机型：
邮箱：

Merlin by HGG 固件仅做个人体验使用，请勿公开分享，感谢大家的配合！

Merlin by HGG 无法公开发布原因：

为防止用户更改路由器射频参数而导致干扰其他设备情况的发生，FCC对无线路由器制造商发出了新的监管要求，禁止路由器刷第三方固件或修改功率。尽管FCC称此举并非针对第三方路由器固件（第三方固件也可以遵守规定），但开源系统的爱好者担心路由器厂商会全面禁止刷机，所以这是服从FCC监管的最简单方案。

请大家尊重 Merlin by HGG 作者 Hugo 意愿，勿在任何公开平台分享其固件，避免不必要之麻烦！

CURRENT VERSION:
================

380.65.8_HGG-FINAL (based on RMerlin 380.65_4 + ASUS 380.4180 GPL code)

SUPPORTED MODELS:
================

RT-N16, RT-N66U, RT-AC66U, RT-N18U, RT-AC56U, RT-AC56S, DSL-AC68U, RT-AC68U/F/P, RT-AC1900/P, RT-AC87U, RT-AC88U, RT-AC3100, RT-AC3200, RT-AC5300
U, R, W and P variations are also compatible.

U - Base Model
R - Retail Model
W - White Color
P - New model also known as RT-AC68U V2.

All HW revisions are supported.

*UNLOCKED* FW files with 92 updated old packages to latest versions (lots of CVEs fixes), pppoe-server, sftp-server and bonding support,
custom MOTD, nano editor, new FW commands available and some other extra features that could be seen in detail on FW changes list bellow.

UPDATED PACKAGES:
================

atop bonnie bridge-utils coreutils curl cyassl diskdev_cmds darkstat dnsmasq dnscrypt dosfstools dropbear e2fsprogs ebtables ecmh expat ffmpeg flac
flex gdb geoIP htop ifenslave iftop igmpproxy iperf iproute2 iproute2-3x iputils jpeg jquery libevent libexif libgcrypt libgdbm libgpgerror libgmp
libmnl libncurses libogg libpcap libsodium libusb libvorbis libxml2 lighttpd lsof lzma lzo masscan matrixssl mDNSResponder memtester minidlna miniupnpd
nano ncat neon nettle nmap nping net-snmp netstat-nat ntfs-3g openlldp openpam openssl openvpn pcre ppp pppoe-server pptp-client pptpd quagga radvd
sdparm sftp-server sqlite strace tcpdump tor usb_modeswitch udev udhcpd udpxy util-linux vlan vsftpd wget wireless_tools xl2tpd xzutils zlib

********************************************************************************************************************************************
* MANDATORY: FACTORY DEFAULT RESTORE (http://ROUTERIP/Advanced_SettingBackup_Content.asp) AND/OR HW RESET IS REQUIRED AFTER FW UPGRADE *
* ******** A REBOOT / POWER CYCLE IS ALSO RECOMMENDED IN ORDER TO LOAD DEFAULT CONFIGURATION.                                        *
* DO NOT USE/IMPORT OLD CONFIGURATION FILE FROM A DIFFERENT FW AFTER FLASHING, JUST CONFIGURE IT MANUALLY FROM SCRATCH.                *
*                                                                                                                                        *
* ALL WIRELESS CHANNELS ARE UNLOCKED AND AVAILABLE ON THIS FW, SO YOUR CLIENTS COULD NOT USE SOME OF THEM BECAUSE OF REGION LOCK ON THE  *
* CLIENT SIDE. DO NOT USE AUTO CONTROL CHANNEL OPTION OR THE ROUTER CAN ACT LIKE IT'S NOT BROADCASTING TO THOSE CLIENTS.                *
*                                                                                                                                        *
* ALWAYS CHOOSE A MANUAL CONTROL CHANNEL ON BOTH 2.4 AND 5GHZ BANDS (http://ROUTERIP/Advanced_Wireless_Content.asp)                   *
*                                                                                                                                        *
********************************************************************************************************************************************

POWER SLIDE: - http://ROUTERIP/Advanced_WAdvanced_Content.asp
===========

These are the new TX Power level reference values:

1% => 30mW (13.2dBm + 1.5dBm[AG] = 14.7dBm)

  25% => 119mW (19.2dBm + 1.5dBm[AG] = 20.7dBm)

  50% => 251mW (22.5dBm + 1.5dBm[AG] = 24dBm)

  75% => 531mW (25.7dBm + 1.5dBm[AG] = 27.2dBm)

100% => 1000mW (28.5dBm + 1.5dBm[AG] = 30dBm)

By default the FW powerslide is set to 50% (24dBm), for more information about txpower usage please read:

http://quantenna.wpengine.com/wp ... 1nPowerSettings.pdf

NOTE: This FW will increase wireless signal strength RSSI by 10-24dbm over stock/other FWs on 2.4 and 5GHZ bands, depending on router model.

ENHANCED MODE / MAXIMUM COVERAGE option (only available on FW versions >= 380.57) can be used to gain an extra ~7-12dBm (2.4GHZ) / ~3-5dBm (5GHZ).

IMPORTANT NOTE:
===============

Local regional laws regarding RF power transmission and channels use should ALWAYS be respected when using this software.

ASUS KNOWN ISSUES:
=================

Specifically on RT-AC87U model:

- Guest Networking
- Wireless information
- WPS

TODO LIST:
=========

- Iptables nDPI support.
- Support GT-AC5300 model.
- WEBUI wireless management restriction.
- WEBUI overclocking support.

CHANGES:
=======

380.65.8: (17 JUN 17)

- NEW: Minor backports from ASUS 382.12184 GPL code.
- FIXED: Advanced_OpenVPNClient_Content.asp keys & certificates visual bug.
- FIXED: DSL-AC68U missing configuration option.
- FIXED: RT-N18U/RT-AC56U/S LAN/USB LED always on.
- FIXED: RT-N18U Stealth Mode. (Power status only)
- FIXED: Samba CVE-2017-2619 vulnerability.
- FIXED: Timemachine service malfunction due to AVAHI faulty configuration.
- UPDATED: Avahi to 0.6.32 version.
- UPDATED: Curl to 7.54.1 version.
- UPDATED: NMap to 7.50 version.
- UPDATED: Support DSL-AC68U model. (EXPERIMENTAL)*
- REVERTED: DSL-AC68U Repeater Mode support.

* Waiting for DSL-AC68U test unit to officially support this model, 380.65.7 known issues should be fixed on this version.

Status:
=======

RT-N16 - READY.
1600f8709764b76d110d86366be5597f2c4aba89dd76bbd11796579021b918f5  RT-N16_380.65.8_HGG-FINAL.trx (26.374KB)

RT-N18U - READY.
5b76800b417e04ba4ad7bd38cca700ddf6a212df4bc81167cef5d321184dd794  RT-N18U_380.65.8_HGG-FINAL.trx (41.717KB)

RT-N66U - READY.
4b0d63ef00cee2e5159935eff116c8867bfe4c6397379b102dd65a208d0871dc  RT-N66U_380.65.8_HGG-FINAL.trx (28.213KB)

RT-AC66U - READY.
ca651c8df5d71e4874462289ac0d035c1688878c50d6b9a05db9eafbb653b0cb  RT-AC66U_380.65.8_HGG-FINAL.trx (33.509KB)

RT-AC56S - READY.
c67cb87e7dd29475d58b7d39f6b482ce4da6eb3e3fbf1be90b1476a418c183ad  RT-AC56S_380.65.8_HGG-FINAL.trx (41.848KB)

RT-AC56U - READY.
15db85b10dead562669897e3edc5e6dac6ae67cbba7329eb2425d4047d2a46f8  RT-AC56U_380.65.8_HGG-FINAL.trx (42.061KB)

DSL-AC68U - READY.
74e7abdc21c949127b99a4555d261fb299cf207bbbfb00fbdd101ce54cebfbb2  DSL-AC68U_380.65.8_HGG-FINAL.trx (44.966KB)

RT-AC68U - READY.
e4c989f63bd8d237cc8884409eab269eeb983f706b23b871902e6d1b539d8d6c  RT-AC68U_380.65.8_HGG-FINAL.trx (42.205KB)

RT-AC87U - READY.
5ab29d7e38083458c7c4d2ca0a1ad04170210644ee2df9205c18c3527a026c26  RT-AC87U_380.65.8_HGG-FINAL.trx (47.349KB)
7daef9b8fa8148fb5950ed17f6ede31d513411ddf3729f59e5add51cfb7644a2  RT-AC87U_380.65.8_HGG-FINAL_OLDQTN.trx (47.104KB)

RT-AC88U - READY.
3d0ba171fad2309dfea157aa98540ba38ac8c124d1f41bf388394cbaea9835c6  RT-AC88U_380.65.8_HGG-FINAL.trx (44.077KB)

RT-AC3100 - READY.
de50774b7680203755b1f77f337215b4783608d060e06540dcd92a858876f8a9  RT-AC3100_380.65.8_HGG-FINAL.trx (44.044KB)

RT-AC3200 - READY.
c9b5c776c459cc4f4b15d65676781d0097653012bdee2ed2e0237885e13c84e5  RT-AC3200_380.65.8_HGG-FINAL.trx (42.713KB)

RT-AC5300 - READY.
a3dea8fe4030314423c6ce8662e28ff3f7a09b68cbb5f15a773c473b0cbf1712  RT-AC5300_380.65.8_HGG-FINAL.trx (44.097KB)

若想下载 Merlin by HGG 当前固件，请跟帖回复您的邮箱，跟帖格式如下
机型：
邮箱：

Merlin by HGG 固件仅做个人体验使用，请勿公开分享，感谢大家的配合！

Merlin by HGG 无法公开发布原因：

为防止用户更改路由器射频参数而导致干扰其他设备情况的发生，FCC对无线路由器制造商发出了新的监管要求，禁止路由器刷第三方固件或修改功率。尽管FCC称此举并非针对第三方路由器固件（第三方固件也可以遵守规定），但开源系统的爱好者担心路由器厂商会全面禁止刷机，所以这是服从FCC监管的最简单方案。

请大家尊重 Merlin by HGG 作者 Hugo 意愿，勿在任何公开平台分享其固件，避免不必要之麻烦！

微信扫一扫，阅读更方便^_^