Merlin--HGG 380.63(31-Oct-2016，Changelog Update)

Master

POWER SLIDE: - http://ROUTERIP/Advanced_WAdvanced_Content.asp
===========

These are the new TX Power level reference values:

   1% => 59mW (16.2dBm + 1.5dBm[AG] = 17.7dBm)


  25% => 118mW (19.2dBm + 1.5dBm[AG] = 20.7dBm)


  50% => 250mW (22.5dBm + 1.5dBm[AG] = 24dBm)


  75% => 500mW (25.5dBm + 1.5dBm[AG] = 27dBm)


100% => 1000mW (28.5dBm + 1.5dBm[AG] = 30dBm)

By default the FW powerslide is set to 50% (24dBm), for more information about txpower usage please read:

http://quantenna.wpengine.com/wp-content/uploads/2016/08/80211nPowerSettings.pdf

NOTE: This FW will increase wireless signal strength RSSI by 10-24dbm over stock/other FWs on 2.4 and 5GHZ bands, depending on router model.

ENHANCED MODE / MAXIMUM COVERAGE option (only available on FW versions >= 380.57) can be used to gain an extra ~7-12dBm (2.4GHZ) / ~3-5dBm (5GHZ).

IMPORTANT NOTE:
===============

Local regional laws regarding RF power transmission and channels use should ALWAYS be respected when using this software.

CONTACT / FEEDBACK:
==================

asuswrt.hgg@gmail.com

ASUS KNOWN ISSUES:
=================

- RT-AC88U/RT-AC3100/RT-AC5300 channels randomly not stick after manual selection on WEBUI. (Visual bug)

TODO LIST:
=========

- Iptables nDPI support.
- WEBUI wireless management restriction.
- WEBUI overclocking support.

CHANGES:
=======

380.63: (WORK IN PROGRESS)

- NEW: Default TXPower value set to 50%.
- NEW: Major changes on TXPower code.
- NEW: Minor backports from latest GPL version.
- NEW: NCurses Unicode (UTF8) support.
- NEW: RT-AC3200, RT-AC88U, RT-AC3100, RT-AC5300 wireless code.
- NEW: UPNP service disabled by default.
- FIXED: Dirty Cow kernel CVE-2016-5195 vulnerability. (ARM & MIPS builds)
- FIXED: Minor code issues.
- FIXED: Obsolete code. (mktemp, utime)
- FIXED: Overloaded RC ASUS code.
- FIXED: RT-AC87U Link Aggregation (LACP) reverse LAN port text order.
- FIXED: RT-AC87U TXPower adjustment code on different HW revisions.
- FIXED: Size optimization due to redundancy files.
- UPDATED: GDB to 7.12 version.
- UPDATED: Ipset to 6.29 version. (ARM only)
- UPDATED: Libpcap to 1.8.1 version.
- UPDATED: Nano Editor to 2.7.1 version.
- UPDATED: NMap to 7.31 version.
- UPDATED: SQLite to 3.15.0 version.
- UPDATED: Strace to 4.14 version.
- UPDATED: TCPdump to 4.8.1 version.
- UPDATED: Tor to 0.2.8.9 version.

* HW RESET/FACTORY DEFAULT AND MANUAL SETUP IS RECOMMENDED AFTER FLASHING, DO NOT USE OLD CONFIGURATION FILE IMPORT.

微信扫一扫，阅读更方便^_^

iphone8

感谢分享。。。