Original: http://www.shadowandy.net/2012/03/asus-rt-n66u-tomatousb-firmware-flashing-guide.htm
Download Asus RT-N66U Flash utilityDownload Shibby RT-N66U firmwareK26RT-N is appropriate for the RT-N66U. Go ahead and pick the latest release by date. Inside that directory you want the to pick the Asus RT-N66u 64k. The 64k in the name means that 64k of flash memory will be used as NVRAM. Inside that directory the .trx file with AIO in the name has all possible features compiled in and enabled. If this is your first time installing, AIO is a good jumping off point.
Preparing for firmware restoration to TomatoUSB (Shibby)The steps are simple, you will need to:
Before you proceed, pull out the power cable to your RT-N66U and have a pen ready to press the reset button (between the USB ports and WAN port)
Flash the TomatoUSB firmware onto the RT-N66U.It is always a good practice to clear out the previous settings (in NVRAM) whenever you flash to different firmwares. This is true for PC BIOSs as well. In this case, it is required to flush out the NVRAM from values that may have been previously stored by the stock firmware that are no longer valid for TomatoUSB.
You can either flush the NVRAM either through key presses or through web admin.
Clearing NVRAM via key pressesThe TomatoUSB administration web should be at http://192.168.1.1. If it is not, do a “ipconfig” or “ifconfig” and navigate to the gateway address with your web browser. If you are not able to get an IP address from DHCP, you might want to set your computer’s IP address to 192.168.1.2/24.
When prompted for a login, the default is:
Once you are in, follow the next step to clear out the previous settings
| 大致翻译下： https://gist.github.com/joshenders/3941269 Original: http://www.shadowandy.net/2012/03/asus-rt-n66u-tomatousb-firmware-flashing-guide.htm Download Asus RT-N66U Flash utility（下载华硕RT-N66U 更新工具） Download Shibby RT-N66U firmware （系在RT-N66U Shibby 固件） K26RT-N is appropriate for the RT-N66U. Go ahead and pick the latest release by date. Inside that directory you want the to pick the Asus RT-N66u 64k. The 64k in the name means that 64k of flash memory will be used as NVRAM. Inside that directory the .trx file with AIO in the name has all possible features compiled in and enabled. If this is your first time installing, AIO is a good jumping off point. （RT-N66U使用的是K26RT-N,进入这个目录里面下载最新的固件,在这个目录里面找到RT-N66U 包含64K字样的,这个64K的意思就是你的Flash中有64K用作NVRAM，以.trx结尾,名字里面有AIO的档案,包含了大部分的功能在里面,如果你是第一次安装,AIO这种比较适合你） Preparing for firmware restoration to TomatoUSB (Shibby) （准备更新固件到Tomato） The steps are simple, you will need to: (步骤很简单,你只需要：)
Before you proceed, pull out the power cable to your RT-N66U and have a pen ready to press the reset button (between the USB ports and WAN port) (以上所有步骤之前,你先断开电源,然后按住Reset按钮不放,再上电,看到电源灯开始闪烁后,即代表RT-N66U已经进入救援模式) Flash the TomatoUSB firmware onto the RT-N66U.
Finally, clearing the NVRAM before you use TomatoUSB It is always a good practice to clear out the previous settings (in NVRAM) whenever you flash to different firmwares. This is true for PC BIOSs as well. In this case, it is required to flush out the NVRAM from values that may have been previously stored by the stock firmware that are no longer valid for TomatoUSB. You can either flush the NVRAM either through key presses or through web admin. (最后,最好是清理NVRAM在你刷机完成使用之前) Clearing NVRAM via key presses (通过按压按钮清空NVRAM)
Clearing NVRAM via web admin (通过管理页面清空NVRAM) The TomatoUSB administration web should be at http://192.168.1.1. If it is not, do a “ipconfig” or “ifconfig” and navigate to the gateway address with your web browser. If you are not able to get an IP address from DHCP, you might want to set your computer’s IP address to 192.168.1.2/24. When prompted for a login, the default is:
Once you are in, follow the next step to clear out the previous settings
（如果刷机完毕你使用192.168.1.1无法进入设定页面,你可以尝试网卡设定固定IP 192.168.1.2/24后再试试看） （登陆的账号密码为 ro0t/admin） 当你进入后,到
|
| 欢迎光临 华硕网络产品技术交流平台 (https://www.52asus.com/) | Powered by Discuz! X3.4 |