标题: Asuswrt-Merlin 380.60 Beta 1 is now available [打印本页] 作者: 514422325 时间: 2016-6-23 23:35 标题: Asuswrt-Merlin 380.60 Beta 1 is now available Asuswrt-Merlin 380.60 Beta 1 is now available for all ARM models only (Asus's latest GPL release is missing required components for the RT-N66U and RT-AC66U).
This is the first release that supports Asus's new header format, required by their firmware versions newer than 3.0.0.4.380_3000 or about. This also means that the same restriction will apply with 380.60: you will not be able to directly flash any older firmware (Asus or Merlin), nor any other third party firmware that does not use the new header format. For the time being it's still possible to flash such incompatible firmwares by using Firmware Recovery mode, but this could change in the future if Asus were to update the bootloader to implement the same firmware restrictions.
Here is the highlight of changes:
Merged with Asus GPL 380_3479. This includes the new firmware validation code.
A new option was added to Traditional QoS allowing the kernel to properly calculate packet overhead for users with DSL (or other ATM-based connections). Note that Traditional QoS is still broken with the newer models, and there are doubts as well as to whether it works properly with the RT-AC56U or RT-AC68U.
OpenVPN was updated to 2.3.11.
Fixes to IPv6 sometime requesting a bogus prefix length from the ISP.
Various minor tweaks and fixes to Networkmap, minidlna, samba and wget SSL support. See the Changelog for complete details.
Things that are in need of particular testing:
IPv6 connectivity, especially if you previously had trouble obtaining a delegated prefix from your ISP.
DLNA stability (the broadcast announcement code was updated to the latest Asus code)
By request, the Roaming Assistant will now accept values as high as -50. Please confirm that those values higher than -70 do work at all.
Please keep discussions on this specific firmware release. Any off-topic discussions will be either ignored or deleted. Also, always specify your router model when posting any feedback.
