刷的是原厂的官方最新固件？？？
对，重新刷的是官方3.0.0.4.388_24231 更新一下，路由器刷官方3.0.0.4.388_24231固件后双清重置，除MAC白名单外照抄以前设置，关闭通用 Beamforming，强制ax only 160MHz，华为设备握手2400Mb没问题了，但内网测速跑下来1300Mb，外网花瓣测速能到1300，电信官方测速800-900。（10#）
1300这个数字我反复查了一下，发现ac 5GHz 80MHz 3x3MIMO正好在这里，但我的路由器系统记录里，也明明白白都是ax 160MHz Tx2401.9M Rx6M（Rx动态的）。尝试过关闭2.4G网络，关闭2.4G访客网络，断开USB风扇，只连一台设备，测速还是1300。我用有线测内网在5-6Gb，设备瓶颈应该是没有的。
这最终是路由器性能瓶颈吗？但又正好卡在1300这一档不上不下的，总觉得很奇怪。实在找不出问题也就算了
附系统记录-无限用户的信息：
SSID: "Leo"
noise: -86 dBm Channel: 2
BSSID: 3C:7C:3F:E0:58:A8 Capability: ESS ShortSlot RRM
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]
HE Capable:
Chanspec: 2.4GHz channel 2 20MHz (0x1002)
Primary channel: 2
HT Capabilities: 40Mhz SGI20 SGI40
Supported HT MCS : 0-23
Supported VHT MCS:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
NSS3 Tx: 0-11 Rx: 0-11
Supported HE MCS:
80 Mhz:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
NSS3 Tx: 0-11 Rx: 0-11
QBSS Channel Utilization: 0xff (100 %)
Interference Level: Acceptable
Mode : AP Only
Stations List
----------------------------------------
idx MAC Associated Authorized RSSI PHY PSM SGI STBC MUBF NSS BW Tx rate Rx rate Connect Time
60:E9:AA:7E:80:5B Yes Yes -39dBm n Yes Yes No No 120M 65M 24M 00:24:48
1 44:B2:95:C6:54:94 Yes Yes -38dBm n NoYes YesNo 120M 72.2M 72.2M 00:24:17
1 54:EF:44:22:EB:BB Yes Yes -42dBm n NoYes YesNo 220M 130M 117M 00:25:22
1 44:B2:95:C6:1E:8C Yes Yes -52dBm n NoYes YesNo 120M 72.2M 65M 00:25:22
SSID: "Capricornus"
noise: -86 dBm Channel: 48/160
BSSID: 3C:7C:3F:E0:58:AC Capability: ESS RRM
Supported Rates: [ 6(b) 9 12(b) 18 24(b) 36 48 54 ]
HE Capable:
Chanspec: 5GHz channel 50 160MHz (0xeb32)
Primary channel: 48
HT Capabilities: 40Mhz SGI20 SGI40
Supported HT MCS : 0-31
Supported VHT MCS:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
NSS3 Tx: 0-11 Rx: 0-11
NSS4 Tx: 0-11 Rx: 0-11
Supported HE MCS:
80 Mhz:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
NSS3 Tx: 0-11 Rx: 0-11
NSS4 Tx: 0-11 Rx: 0-11
160 Mhz:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
NSS3 Tx: 0-11 Rx: 0-11
NSS4 Tx: 0-11 Rx: 0-11
QBSS Channel Utilization: 0x16 (8 %)
Interference Level: Acceptable
Mode : AP Only
DFS status: state In-Service Monitoring(ISM) time elapsed 1475850ms radar channel cleared by DFS channel 48/160 (0xEB32)
Channel Information
----------------------------------------
Channel 36 A Band
Channel 40 A Band
Channel 44 A Band
Channel 48 A Band
Channel 52 A Band, RADAR Sensitive
Channel 56 A Band, RADAR Sensitive
Channel 60 A Band, RADAR Sensitive
Channel 64 A Band, RADAR Sensitive
Channel 149 A Band
Channel 153 A Band
Channel 157 A Band
Channel 161 A Band
Channel 165 A Band
Stations List
----------------------------------------
idx MAC Associated Authorized RSSI PHY PSM SGI STBC MUBF NSS BW Tx rate Rx rate Connect Time
C8:68:DE:36:3A:BE Yes Yes -40dBm axYes Yes YesYes 2 160M 2268.5M 6M 00:18:59
3C:38:F4:2D:48:88 Yes Yes -47dBm axYes Yes YesYes 2 160M 2268.5M 6M 00:20:46
18:69:D4:EE:7D:89 Yes Yes -49dBm axYes Yes YesYes 2 160M 2268.5M 6M 00:24:20
samlee111 发表于 2024-2-4 00:08
更新一下，路由器刷官方3.0.0.4.388_24231固件后双清重置，除MAC白名单外照抄以前设置，关闭通用 Beamformi ...
无线测速，一般是连线速度的对半多一点。 1000M以上需要关AiProtection和网络监控相关功能，否则CPU性能会限制速度。
页:
1
[2]