Merlin--HGG 380.70.1-RC2

Master · 发表于 2018-7-23 14:18:26

若想下载 Merlin by HGG 当前固件，请跟帖回复您的邮箱，跟帖格式如下
机型：
邮箱：

Merlin by HGG 固件仅做个人体验使用，请勿公开分享，感谢大家的配合！

Merlin by HGG 无法公开发布原因：

为防止用户更改路由器射频参数而导致干扰其他设备情况的发生，FCC对无线路由器制造商发出了新的监管要求，禁止路由器刷第三方固件或修改功率。尽管FCC称此举并非针对第三方路由器固件（第三方固件也可以遵守规定），但开源系统的爱好者担心路由器厂商会全面禁止刷机，所以这是服从FCC监管的最简单方案。

请大家尊重 Merlin by HGG 作者 Hugo 意愿，勿在任何公开平台分享其固件，避免不必要之麻烦！

CURRENT VERSION:
================

380.70_HGG-FINAL (based on RMerlin 380.70 + ASUS 384 GPL code backports)

SUPPORTED MODELS:
================

RT-N16, RT-N66U, RT-AC66U, RT-AC66U_B1, RT-N18U, RT-AC56S, RT-AC56U, DSL-AC68U, RT-AC68U, RT-AC68P, RT-AC68UF, RT-AC1900, RT-AC1900P,
RT-AC87U, RT-AC88U, RT-AC3100, RT-AC3200, RT-AC5300

U, R, W and P variations are also compatible.

U - Base Model
R - Retail Model
W - White Color
P - New model also known as RT-AC68U V2.

All HW revisions are supported.

*UNLOCKED* FW files with 107 updated old packages to latest version (lots of CVEs fixes), pppoe-server, sftp-server and bonding support, custom MOTD, nano editor, new FW commands available and some other extra features that could be seen in detail on FW changes list bellow.

UPDATED PACKAGES:
================

atop avahi bonnie bridge-utils chartjs coreutils curl cyassl diskdev_cmds darkstat dnsmasq dnscrypt dosfstools dropbear e2fsprogs ebtables ecmh expat ffmpeg flac flex fullcalendar gdb geoIP haveged htop ifenslave iftop igmpproxy iperf iproute2 iproute2-3x iputils jpeg jquery jquery-ui json-c libevent libexif libgcrypt libgdbm libgpgerror libgmp libiconv libmnl libogg libpcap libsodium libusb libvorbis libxml2 lighttpd lsof lzma lz4 lzo masscan matrixssl mDNSResponder memtester minidlna miniupnpc miniupnpd nano ncat ncurses neon nettle nfs-utils nmap nping net-snmp netstat-nat ntfs-3g Odhcpc6 openlldp openpam openssl openvpn pcre portmap ppp pppoe-server pptp-client pptpd quagga radvd requirejs sdparm sftp-server sqlite strace tcpdump tor usb_modeswitch udev udhcpd udpxy util-linux vlan vsftpd wget wireless_tools wpa_supplicant xl2tpd xzutils zlib

********************************************************************************************************************************************
* MANDATORY: FACTORY DEFAULT RESTORE (http://ROUTERIP/Advanced_SettingBackup_Content.asp) AND/OR HW RESET IS REQUIRED AFTER FW UPGRADE *
* ******** A REBOOT / POWER CYCLE IS ALSO RECOMMENDED IN ORDER TO LOAD DEFAULT CONFIGURATION.                                        *
* DO NOT USE/IMPORT OLD CONFIGURATION FILE FROM A DIFFERENT FW AFTER FLASHING, JUST CONFIGURE IT MANUALLY FROM SCRATCH.                *
*                                                                                                                                        *
* ALL WIRELESS CHANNELS ARE UNLOCKED AND AVAILABLE ON THIS FW, SO YOUR CLIENTS COULD NOT USE SOME OF THEM BECAUSE OF REGION LOCK ON THE  *
* CLIENT SIDE. DO NOT USE AUTO CONTROL CHANNEL OPTION OR THE ROUTER CAN ACT LIKE IT'S NOT BROADCASTING TO THOSE CLIENTS.                *
*                                                                                                                                        *
* ALWAYS CHOOSE A MANUAL CONTROL CHANNEL ON BOTH 2.4 AND 5GHZ BANDS (http://ROUTERIP/Advanced_Wireless_Content.asp)                   *
*                                                                                                                                        *
********************************************************************************************************************************************

POWER SLIDE: - http://ROUTERIP/Advanced_WAdvanced_Content.asp
===========

These are the new TX Power level reference values:

1% => 30mW (13.2dBm + 1.5dBm[AG] = 14.7dBm)

  25% => 119mW (19.2dBm + 1.5dBm[AG] = 20.7dBm)

  50% => 251mW (22.5dBm + 1.5dBm[AG] = 24dBm)

  75% => 531mW (25.7dBm + 1.5dBm[AG] = 27.2dBm)

100% => 1000mW (28.5dBm + 1.5dBm[AG] = 30dBm)

By default the FW powerslide is set to 50% (24dBm), for more information about txpower usage please read:

http://quantenna.wpengine.com/wp ... 1nPowerSettings.pdf

NOTE: This FW will increase wireless signal strength RSSI by 10-24dbm over stock/other FWs on 2.4 and 5GHZ bands, depending on router model.

ENHANCED MODE / MAXIMUM COVERAGE option (only available on FW version >= 380.57) can be used to gain an extra ~7-12dBm (2.4GHZ) / ~3-5dBm (5GHZ).

IMPORTANT NOTE:
===============

Local regional laws regarding RF power transmission and channels use should ALWAYS be respected when using this software.

TODO LIST:
=========

- Iptables nDPI support.
- WEBUI wireless management restriction.

CHANGES:
=======

380.70.1_RC2:

- NEW: DSL-AC68U driver to 5.5.2.10.
- NEW: DSL-AC68U firmware to 1.0.4.6.
- NEW: Firmware size optimisation.
- NEW: General code improvements.
- NEW: Htop UTF8 support.
- NEW: Minor backports from upstream.
- NEW: Resize2fs support.
- NEW: WEBUI Brute Force Protection (FTP) block time and hit count options.
- NEW: WEBUI FTP Brute Force Protection.
- NEW: WEBUI FTP Server allows to change service port.
- NEW: WEBUI SSH Server maximum authentication option.
- NEW: WEBUI SSH Server timeout option.
- CHANGED: WEBUI time options convertion from seconds to minutes.
- FIXED: BogoMIPS information on multi-core CPU.
- FIXED: Dual WAN funtionality.
- FIXED: E2fsprogs old kernel filesystem incompatibility.
- FIXED: General code issues.
- FIXED: Htop 2.2.0 segmentation fault when using -s switch. (Htop bug)
- FIXED: Htop terminal mouse clicking.
- FIXED: Kernel backport missing code. (MIPS)
- FIXED: LnxHtmlEnumDict core dump. (Asus bug)
- FIXED: Memory leaks found on several components.
- FIXED: Minor code issues.
- FIXED: NVRAM memory leak.
- FIXED: OpenVPN bad merge regression.
- FIXED: RT-AC66U default wireless configuration. (ASUS bug)
- FIXED: RT-AC87U 5G LED always ON after using wireless button. (ASUS bug)
- FIXED: RT-AC87U LACP configuration.
- FIXED: RT-AC88U/RT-AC3100 extra code.
- FIXED: RT-N18U NTFS filesystem.
- FIXED: RT-N18U slow WAN speeds. (ASUS bug)
- FIXED: Services code redundancy.
- FIXED: Services timing issue affecting RT-AC68U C1/E1 models.
- FIXED: WAN DHCP when connection lost or cable removed.
- FIXED: WEBUI Brute Force Protection (SSH) hideport.
- FIXED: WEBUI Brute Force Protection (SSH) hit count option value.
- UPDATED: Avahi to upstream version 0.7-fe6adcb.
- UPDATED: Curl to 7.61.0.
- UPDATED: DNSMasq to upstream version 2.80test2-24-a3bd7e7.
- UPDATED: DNSCrypt resolvers to 2018.05.21.
- UPDATED: E2fsprogs to 1.44.3.
- UPDATED: Ebtables to upstream version 2.0.10-4.
- UPDATED: Iperf to 3.6.
- UPDATED: Libgpg-error to 1.32.
- UPDATED: Libgcrypt to 1.8.3.
- UPDATED: Libgdbm to 1.16.
- UPDATED: MiniUPnPd to 2.1.
- UPDATED: Nano to 2.9.8.
- UPDATED: NFS-Utils to 2.3.2.
- UPDATED: SQLite to 3.24.0.
- UPDATED: Tor to 0.3.3.9.
- REVERTED: Ncurses from 6.1 to 6.0.

若想下载 Merlin by HGG 当前固件，请跟帖回复您的邮箱，跟帖格式如下
机型：
邮箱：

Merlin by HGG 固件仅做个人体验使用，请勿公开分享，感谢大家的配合！

Merlin by HGG 无法公开发布原因：

为防止用户更改路由器射频参数而导致干扰其他设备情况的发生，FCC对无线路由器制造商发出了新的监管要求，禁止路由器刷第三方固件或修改功率。尽管FCC称此举并非针对第三方路由器固件（第三方固件也可以遵守规定），但开源系统的爱好者担心路由器厂商会全面禁止刷机，所以这是服从FCC监管的最简单方案。

请大家尊重 Merlin by HGG 作者 Hugo 意愿，勿在任何公开平台分享其固件，避免不必要之麻烦！

微信扫一扫，阅读更方便^_^