请选择 进入手机版 | 继续访问电脑版

华硕路由爱好者社区

 找回密码
 立即注册
查看: 917|回复: 28

[Asuswrt-Merlin] Asuswrt-Merlin 384.4 Beta 3

[复制链接]

258

主题

2707

帖子

6772

积分

管理员

正品行货

Rank: 9Rank: 9Rank: 9

积分
6772

最佳新人活跃会员热心会员推广达人宣传达人灌水之王突出贡献优秀版主荣誉管理论坛元老

QQ
发表于 2018-3-12 15:04:06 | 显示全部楼层 |阅读模式
Asuswrt-Merlin 384 Changelog
============================

General changes in the 384/NG branch vs 380.xx:
   - Clear your browser cache after flashing your first 384 build.
   - It's generally recommended to do a factory default reset when coming from 380 to 384/NG.
   - HDD spindown settings moved to the System settings page
   - SSL certificate management moved to the DDNS page for models that support Let's Encrypt
   - Nvram settings now have maximum lengths enforced, to protect against buffer overruns.  This means that some very long lists of settings might no longer be possible on 384.xx.

384.4 (xx-xxx-2018)
   - NEW: Merged with GPL 384_20379 (with some binary components from 382_50010 and 384_20308 depending on models)
   - NEW: Added support for the RT-AC5300.
   - NEW: Added support for the RT-AC87U.
   - NEW: Added IPSEC support to the RT-AC86U.
   - NEW: Support the new Entware 64-bit repo on the RT-AC86U. To switch to the new repository, re-run the entware-setup.sh script.  You will need to reinstall your apps (your old config files are backed up on your USB disk).
   - CHANGED: Tightened security around some config files.
   - CHANGED: Allow guest networks settings for AP isolation and SSID broadcast to be set separately from their parent interface (John Bacho)
   - CHANGED: Samba protocol support can now be set to SMBv1, SMBv2, or SMBv1 + SMBv2 (the new default). This will result in a performance drop on all models but the RT-AC86U, but will be more secure. Ideally, people should change it to SMBv2 only, and then reboot all their client devices to start using only the new protocol.
   - CHANGED: Re-added some of the logging sd-idle used to do in 380.xx.
   - CHANGED: Switched to the new Entware repo for armv7 models. To upgrade, run the following commands TWICE:

              opkg update; opkg upgrade

   - FIXED: Resetting an OpenVPN client to default settings might revert back after a reboot.
   - FIXED: log flood from lldpd about "unable to send packet on real device" (moved to debug level)
   - FIXED: Potential racing condition that could lead to two instances of miniupnpd running at boot time.
   - FIXED: Single-char hostnames were rejected by DHCP static leasees page.
   - FIXED: AiCloud could sometime generate a new SSL certificate that would overwrite the one stored in jffs.  Now, AiCloud can also use the same one uploaded by the user for the main webui, or the Let's Encrypt one.
   - REMOVED: Telnet server.  Please use SSH for console-based management.
   - REMOVED: Disabled SNMP support on the RT-AC86U (incompatible)
   - REMOVED: Merlin NAT loopback mode (was increasingly problematic as the firmware firewall handling became more complex)


更新机型:
RT-AC66U_B1 (use the RT-AC68U firmware)
RT-AC56U
RT-AC68U, RT-AC68P, RT-AC68UF (including HW revision C1 and E1)
RT-AC1900 & RT-AC1900P (use the RT-AC68U firmware)
RT-AC87U
RT-AC3200
RT-AC88U
RT-AC3100
RT-AC5300
RT-AC86U


下载地址
游客,如果您要查看本帖隐藏内容请回复

0

主题

29

帖子

148

积分

注册会员

Rank: 2

积分
148
发表于 2018-3-12 15:58:25 来自手机 | 显示全部楼层
谢谢分享
回复

使用道具 举报

发表于 2018-3-12 17:05:51 | 显示全部楼层

谢谢分享
回复

使用道具 举报

发表于 2018-3-12 21:15:51 | 显示全部楼层
更新管理员分享。

0

主题

14

帖子

44

积分

新手上路

Rank: 1

积分
44
QQ
发表于 2018-3-12 21:34:19 | 显示全部楼层
收下了 谢谢

0

主题

11

帖子

51

积分

注册会员

Rank: 2

积分
51
发表于 2018-3-12 21:48:38 | 显示全部楼层

谢谢分享
回复

使用道具 举报

0

主题

23

帖子

397

积分

中级会员

Rank: 3Rank: 3

积分
397
发表于 2018-3-13 08:20:54 | 显示全部楼层
感谢分享!
回复

使用道具 举报

2

主题

40

帖子

245

积分

中级会员

Rank: 3Rank: 3

积分
245
发表于 2018-3-13 08:50:59 | 显示全部楼层
感谢楼主分享
发表于 2018-3-13 09:11:18 | 显示全部楼层
收下了 谢谢

0

主题

41

帖子

172

积分

注册会员

Rank: 2

积分
172
发表于 2018-3-13 09:21:17 | 显示全部楼层
谢谢楼主
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|手机版|小黑屋|华硕路由爱好者社区 ( 苏ICP备16010857号 )

GMT+8, 2018-6-21 00:53 , Processed in 0.033085 second(s), 25 queries .

Powered by Discuz! X3

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表