求助AC68U刷了380.65.3_HGG-FINAL断网，请大大分析下日志，万分...

181221

昨天刷了380.65.3_HGG-FINAL，今天下午3点半左右网络断开，因有事出去外面，5点半回家，在路由器的互联网设置页重新拨号又可以上网了，请大大帮忙分析下日志究竟是路由的原因还是光猫的原因，补充下连接方式，电信100M光纤，到光猫，再到AC68U拨号，以下是日志内容，ip已删除。Mar  5 13:54:59 dnsmasq-dhcp[750]: DHCPDISCOVER(br0)
Mar  5 13:54:59 dnsmasq-dhcp[750]: DHCPOFFER(br0)
Mar  5 13:54:59 dnsmasq-dhcp[750]: DHCPREQUEST(br0)  
Mar  5 13:54:59 dnsmasq-dhcp[750]: DHCPACK(br0)
Mar  5 13:56:46 HTTP(S) login: Login successful from
Mar  5 13:58:55 rc_service: httpds 756:notify_rc set_wltxpower_hgg;restart_wireless
Mar  5 13:58:57 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 13:58:57 kernel: device eth1 left promiscuous mode
Mar  5 13:58:57 kernel: br0: port 2(eth1) entering disabled state
Mar  5 13:58:57 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 13:58:57 kernel: device eth2 left promiscuous mode
Mar  5 13:58:57 kernel: br0: port 3(eth2) entering disabled state
Mar  5 13:58:58 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Mar  5 13:59:00 kernel: wl_module_init: passivemode set to 0x0
Mar  5 13:59:00 kernel: wl_module_init: igs set to 0x0
Mar  5 13:59:00 kernel: wl_module_init: txworkq set to 0x0
Mar  5 13:59:00 kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 13:59:01 kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 13:59:01 kernel: device eth1 entered promiscuous mode
Mar  5 13:59:01 kernel: br0: topology change detected, propagating
Mar  5 13:59:01 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 13:59:01 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 13:59:01 kernel: device eth2 entered promiscuous mode
Mar  5 13:59:01 kernel: br0: topology change detected, propagating
Mar  5 13:59:01 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 13:59:01 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 13:59:27 HTTP(S) login: Logout successful
Mar  5 14:01:45 HTTP(S) login: Login successful from
Mar  5 14:02:34 rc_service: httpds 756:notify_rc set_wltxpower_hgg;restart_wireless
Mar  5 14:02:36 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:02:36 kernel: device eth1 left promiscuous mode
Mar  5 14:02:36 kernel: br0: port 2(eth1) entering disabled state
Mar  5 14:02:36 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:02:36 kernel: device eth2 left promiscuous mode
Mar  5 14:02:36 kernel: br0: port 3(eth2) entering disabled state
Mar  5 14:02:37 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Mar  5 14:02:39 kernel: wl_module_init: passivemode set to 0x0
Mar  5 14:02:39 kernel: wl_module_init: igs set to 0x0
Mar  5 14:02:39 kernel: wl_module_init: txworkq set to 0x0
Mar  5 14:02:40 kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:02:40 kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:02:40 kernel: device eth1 entered promiscuous mode
Mar  5 14:02:40 kernel: br0: topology change detected, propagating
Mar  5 14:02:40 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:02:40 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:02:41 kernel: device eth2 entered promiscuous mode
Mar  5 14:02:41 kernel: br0: topology change detected, propagating
Mar  5 14:02:41 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:02:41 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:04:11 rc_service: httpds 756:notify_rc set_wltxpower_hgg;restart_wireless
Mar  5 14:04:14 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:04:14 kernel: device eth1 left promiscuous mode
Mar  5 14:04:14 kernel: br0: port 2(eth1) entering disabled state
Mar  5 14:04:14 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:04:14 kernel: device eth2 left promiscuous mode
Mar  5 14:04:14 kernel: br0: port 3(eth2) entering disabled state
Mar  5 14:04:15 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Mar  5 14:04:17 kernel: wl_module_init: passivemode set to 0x0
Mar  5 14:04:17 kernel: wl_module_init: igs set to 0x0
Mar  5 14:04:17 kernel: wl_module_init: txworkq set to 0x0
Mar  5 14:04:17 kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:04:17 kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:04:18 kernel: device eth1 entered promiscuous mode
Mar  5 14:04:18 kernel: br0: topology change detected, propagating
Mar  5 14:04:18 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:04:18 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:04:18 kernel: device eth2 entered promiscuous mode
Mar  5 14:04:18 kernel: br0: topology change detected, propagating
Mar  5 14:04:18 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:04:18 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:06:41 rc_service: httpds 756:notify_rc set_wltxpower_hgg;restart_wireless
Mar  5 14:06:43 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:06:43 kernel: device eth1 left promiscuous mode
Mar  5 14:06:43 kernel: br0: port 2(eth1) entering disabled state
Mar  5 14:06:43 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:06:43 kernel: device eth2 left promiscuous mode
Mar  5 14:06:43 kernel: br0: port 3(eth2) entering disabled state
Mar  5 14:06:44 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Mar  5 14:06:47 kernel: wl_module_init: passivemode set to 0x0
Mar  5 14:06:47 kernel: wl_module_init: igs set to 0x0
Mar  5 14:06:47 kernel: wl_module_init: txworkq set to 0x0
Mar  5 14:06:47 kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:06:47 kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:06:48 kernel: device eth1 entered promiscuous mode
Mar  5 14:06:48 kernel: br0: topology change detected, propagating
Mar  5 14:06:48 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:06:48 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:06:48 kernel: device eth2 entered promiscuous mode
Mar  5 14:06:48 kernel: br0: topology change detected, propagating
Mar  5 14:06:48 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:06:48 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:08:27 rc_service: httpds 756:notify_rc set_wltxpower_hgg;restart_wireless
Mar  5 14:08:29 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:08:29 kernel: device eth1 left promiscuous mode
Mar  5 14:08:29 kernel: br0: port 2(eth1) entering disabled state
Mar  5 14:08:29 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:08:29 kernel: device eth2 left promiscuous mode
Mar  5 14:08:29 kernel: br0: port 3(eth2) entering disabled state
Mar  5 14:08:30 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Mar  5 14:08:33 kernel: wl_module_init: passivemode set to 0x0
Mar  5 14:08:33 kernel: wl_module_init: igs set to 0x0
Mar  5 14:08:33 kernel: wl_module_init: txworkq set to 0x0
Mar  5 14:08:33 kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:08:33 kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:08:34 kernel: device eth1 entered promiscuous mode
Mar  5 14:08:34 kernel: br0: topology change detected, propagating
Mar  5 14:08:34 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:08:34 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:08:34 kernel: device eth2 entered promiscuous mode
Mar  5 14:08:34 kernel: br0: topology change detected, propagating
Mar  5 14:08:34 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:08:34 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:17:44 rc_service: httpds 756:notify_rc set_wltxpower_hgg;restart_wireless
Mar  5 14:17:46 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:17:46 kernel: device eth1 left promiscuous mode
Mar  5 14:17:46 kernel: br0: port 2(eth1) entering disabled state
Mar  5 14:17:46 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:17:46 kernel: device eth2 left promiscuous mode
Mar  5 14:17:46 kernel: br0: port 3(eth2) entering disabled state
Mar  5 14:17:47 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Mar  5 14:17:49 kernel: wl_module_init: passivemode set to 0x0
Mar  5 14:17:49 kernel: wl_module_init: igs set to 0x0
Mar  5 14:17:49 kernel: wl_module_init: txworkq set to 0x0
Mar  5 14:17:50 kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller (r561982)
Mar  5 14:17:50 kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:17:50 kernel: device eth1 entered promiscuous mode
Mar  5 14:17:50 kernel: br0: topology change detected, propagating
Mar  5 14:17:50 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:17:50 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:17:51 kernel: device eth2 entered promiscuous mode
Mar  5 14:17:51 kernel: br0: topology change detected, propagating
Mar  5 14:17:51 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:17:51 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:19:08 rc_service: httpds 756:notify_rc set_wltxpower_hgg;restart_wireless
Mar  5 14:19:10 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:19:10 kernel: device eth1 left promiscuous mode
Mar  5 14:19:10 kernel: br0: port 2(eth1) entering disabled state
Mar  5 14:19:11 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:19:11 kernel: device eth2 left promiscuous mode
Mar  5 14:19:11 kernel: br0: port 3(eth2) entering disabled state
Mar  5 14:19:12 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Mar  5 14:19:14 kernel: wl_module_init: passivemode set to 0x0
Mar  5 14:19:14 kernel: wl_module_init: igs set to 0x0
Mar  5 14:19:14 kernel: wl_module_init: txworkq set to 0x0
Mar  5 14:19:14 kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:19:14 kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:19:15 kernel: device eth1 entered promiscuous mode
Mar  5 14:19:15 kernel: br0: topology change detected, propagating
Mar  5 14:19:15 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:19:15 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:19:15 kernel: device eth2 entered promiscuous mode
Mar  5 14:19:15 kernel: br0: topology change detected, propagating
Mar  5 14:19:15 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:19:15 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:20:50 rc_service: httpds 756:notify_rc set_wltxpower_hgg;restart_wireless
Mar  5 14:20:52 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:20:53 kernel: device eth1 left promiscuous mode
Mar  5 14:20:53 kernel: br0: port 2(eth1) entering disabled state
Mar  5 14:20:53 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:20:53 kernel: device eth2 left promiscuous mode
Mar  5 14:20:53 kernel: br0: port 3(eth2) entering disabled state
Mar  5 14:20:53 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Mar  5 14:20:56 kernel: wl_module_init: passivemode set to 0x0
Mar  5 14:20:56 kernel: wl_module_init: igs set to 0x0
Mar  5 14:20:56 kernel: wl_module_init: txworkq set to 0x0
Mar  5 14:20:56 kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:20:56 kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:20:57 kernel: device eth1 entered promiscuous mode
Mar  5 14:20:57 kernel: br0: topology change detected, propagating
Mar  5 14:20:57 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:20:57 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:20:57 kernel: device eth2 entered promiscuous mode
Mar  5 14:20:57 kernel: br0: topology change detected, propagating
Mar  5 14:20:57 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:20:57 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:21:44 dnsmasq-dhcp[750]: DHCPDISCOVER(br0)  
Mar  5 14:21:44 dnsmasq-dhcp[750]: DHCPOFFER(br0)
Mar  5 14:21:44 dnsmasq-dhcp[750]: DHCPREQUEST(br0)  
Mar  5 14:21:44 dnsmasq-dhcp[750]: DHCPACK(br0)
Mar  5 14:23:07 rc_service: httpds 756:notify_rc set_wltxpower_hgg;restart_wireless
Mar  5 14:23:09 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:23:09 kernel: device eth1 left promiscuous mode
Mar  5 14:23:09 kernel: br0: port 2(eth1) entering disabled state
Mar  5 14:23:09 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:23:09 kernel: device eth2 left promiscuous mode
Mar  5 14:23:09 kernel: br0: port 3(eth2) entering disabled state
Mar  5 14:23:10 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Mar  5 14:23:13 kernel: wl_module_init: passivemode set to 0x0
Mar  5 14:23:13 kernel: wl_module_init: igs set to 0x0
Mar  5 14:23:13 kernel: wl_module_init: txworkq set to 0x0
Mar  5 14:23:13 kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:23:13 kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:23:13 kernel: device eth1 entered promiscuous mode
Mar  5 14:23:13 kernel: br0: topology change detected, propagating
Mar  5 14:23:13 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:23:13 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:23:14 kernel: device eth2 entered promiscuous mode
Mar  5 14:23:14 kernel: br0: topology change detected, propagating
Mar  5 14:23:14 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:23:14 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:24:55 rc_service: httpds 756:notify_rc set_wltxpower_hgg;restart_wireless
Mar  5 14:24:57 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:24:57 kernel: device eth1 left promiscuous mode
Mar  5 14:24:57 kernel: br0: port 2(eth1) entering disabled state
Mar  5 14:24:57 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:24:57 kernel: device eth2 left promiscuous mode
Mar  5 14:24:57 kernel: br0: port 3(eth2) entering disabled state
Mar  5 14:24:58 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Mar  5 14:25:01 kernel: wl_module_init: passivemode set to 0x0
Mar  5 14:25:01 kernel: wl_module_init: igs set to 0x0
Mar  5 14:25:01 kernel: wl_module_init: txworkq set to 0x0
Mar  5 14:25:01 kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:25:01 kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:25:02 kernel: device eth1 entered promiscuous mode
Mar  5 14:25:02 kernel: br0: topology change detected, propagating
Mar  5 14:25:02 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:25:02 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:25:02 kernel: device eth2 entered promiscuous mode
Mar  5 14:25:02 kernel: br0: topology change detected, propagating
Mar  5 14:25:02 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:25:02 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:26:03 rc_service: httpds 756:notify_rc set_wltxpower_hgg;restart_wireless
Mar  5 14:26:05 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:26:05 kernel: device eth1 left promiscuous mode
Mar  5 14:26:05 kernel: br0: port 2(eth1) entering disabled state
Mar  5 14:26:05 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:26:05 kernel: device eth2 left promiscuous mode
Mar  5 14:26:05 kernel: br0: port 3(eth2) entering disabled state
Mar  5 14:26:06 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Mar  5 14:26:09 kernel: wl_module_init: passivemode set to 0x0
Mar  5 14:26:09 kernel: wl_module_init: igs set to 0x0
Mar  5 14:26:09 kernel: wl_module_init: txworkq set to 0x0
Mar  5 14:26:09 kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:26:09 kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller  (r561982)
Mar  5 14:26:10 kernel: device eth1 entered promiscuous mode
Mar  5 14:26:10 kernel: br0: topology change detected, propagating
Mar  5 14:26:10 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:26:10 kernel: br0: port 2(eth1) entering forwarding state
Mar  5 14:26:10 kernel: device eth2 entered promiscuous mode
Mar  5 14:26:10 kernel: br0: topology change detected, propagating
Mar  5 14:26:10 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 14:26:10 kernel: br0: port 3(eth2) entering forwarding state
Mar  5 17:25:48 dnsmasq-dhcp[750]: DHCPDISCOVER(br0)
Mar  5 17:25:48 dnsmasq-dhcp[750]: DHCPOFFER(br0)
Mar  5 17:25:48 dnsmasq-dhcp[750]: DHCPREQUEST(br0)
Mar  5 17:25:48 dnsmasq-dhcp[750]: DHCPACK(br0)
Mar  5 17:27:11 dnsmasq-dhcp[750]: DHCPREQUEST(br0)  
Mar  5 17:27:11 dnsmasq-dhcp[750]: DHCPACK(br0)
Mar  5 17:27:59 HTTP(S) login: Login successful from
Mar  5 17:29:16 rc_service: httpd 757:notify_rc restart_wan_if 0
Mar  5 17:29:16 pppd[1230]: Hangup (SIGHUP)
Mar  5 17:29:16 pppd[1230]: Terminating on signal 15
Mar  5 17:29:16 pppd[1230]: Connect time 1047.3 minutes.
Mar  5 17:29:16 pppd[1230]: Sent 358202317 bytes, received 1890157561 bytes.
Mar  5 17:29:17 dnsmasq[750]: read /etc/hosts - 5 addresses
Mar  5 17:29:17 dnsmasq[750]: using nameserver
Mar  5 17:29:17 dnsmasq[750]: using nameserver
Mar  5 17:29:17 pppd[1230]: Terminating on signal 15
Mar  5 17:29:18 kernel: Attempt to kill tasklet from interrupt
Mar  5 17:29:18 kernel: device eth0 left promiscuous mode
Mar  5 17:29:18 kernel: br0: port 1(vlan1) entering forwarding state
Mar  5 17:29:18 kernel: device eth0 entered promiscuous mode
Mar  5 17:29:18 kernel: br0: topology change detected, propagating
Mar  5 17:29:18 kernel: br0: port 1(vlan1) entering forwarding state
Mar  5 17:29:18 kernel: br0: port 1(vlan1) entering forwarding state
Mar  5 17:29:21 pppd[30254]: Plugin rp-pppoe.so loaded.
Mar  5 17:29:21 pppd[30254]: RP-PPPoE plugin version 3.11 compiled against pppd 2.4.7
Mar  5 17:29:21 pppd[30257]: pppd 2.4.7 started by liangzhim, uid 0
Mar  5 17:29:21 pppd[30257]: PPP session is 287 (0x11f)
Mar  5 17:29:21 pppd[30257]: Connected to  via interface eth0
Mar  5 17:29:21 pppd[30257]: Using interface ppp0
Mar  5 17:29:21 pppd[30257]: Connect: ppp0 <--> eth0
Mar  5 17:29:21 pppd[30257]: Remote message: Authentication success,Welcome!
Mar  5 17:29:21 pppd[30257]: PAP authentication succeeded
Mar  5 17:29:21 pppd[30257]: peer from calling number  authorized
Mar  5 17:29:22 pppd[30257]: local  IP address
Mar  5 17:29:22 pppd[30257]: remote IP address
Mar  5 17:29:22 pppd[30257]: primary   DNS address
Mar  5 17:29:22 pppd[30257]: secondary DNS address
Mar  5 17:29:22 rc_service: ip-up 30262:notify_rc start_firewall
Mar  5 17:29:22 dnsmasq[750]: read /etc/hosts - 5 addresses
Mar  5 17:29:22 dnsmasq[750]: using nameserver
Mar  5 17:29:22 dnsmasq[750]: using nameserver
Mar  5 17:29:23 wan: finish adding multi routes
Mar  5 17:29:24 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Mar  5 17:29:24 rc_service: ip-up 30262:notify_rc stop_upnp
Mar  5 17:29:24 rc_service: waitting "start_firewall" via ip-up ...
Mar  5 17:29:25 rc_service: ip-up 30262:notify_rc start_upnp
Mar  5 17:29:25 rc_service: waitting "stop_upnp" via ip-up ...
Mar  5 17:29:26 ddns update: ez-ipupdate: starting...
Mar  5 17:29:27 ddns update: connected to nwsrv-ns1.asus.com (103.10.4.108) on port 80.
Mar  5 17:29:27 ddns update: Asus update entry:: return: HTTP/1.1 200 OK^M Date: Sun, 05 Mar 2017 09:29:25 GMT^M Server: Apache^M Content-Length: 0^M Connection: close^M Content-Type: text/html^M ^M
Mar  5 17:29:27 ddns update: retval= 0, ddns_return_code (,200)
Mar  5 17:29:27 ddns update: asusddns_update: 0
Mar  5 17:29:27 ddns: ddns update ok
Mar  5 17:29:27 ntp: start NTP update
Mar  5 17:29:32 rc_service: zcip 30326:notify_rc start_firewall
Mar  5 17:29:32 dnsmasq[750]: read /etc/hosts - 5 addresses
Mar  5 17:29:32 dnsmasq[750]: using nameserver
Mar  5 17:29:32 dnsmasq[750]: using nameserver
Mar  5 17:29:32 zcip client: configured
Mar  5 17:29:33 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Mar  5 17:29:34 rc_service: ip-up 30262:notify_rc start_firewall
Mar  5 17:29:34 rc_service: waitting "start_firewall" via  ...
Mar  5 17:29:36 kernel: HTB: quantum of class 10001 is big. Consider r2q change.
Mar  5 17:29:36 kernel: HTB: quantum of class 20001 is big. Consider r2q change.
Mar  5 17:29:36 kernel: HTB: quantum of class 10009 is big. Consider r2q change.
Mar  5 17:29:36 kernel: HTB: quantum of class 20009 is big. Consider r2q change.
Mar  5 17:29:36 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Mar  5 17:29:36 kernel: HTB: quantum of class 10030 is big. Consider r2q change.
Mar  5 17:29:36 kernel: HTB: quantum of class 10031 is big. Consider r2q change.

微信扫一扫，阅读更方便^_^

涵哥

这里面只有一次拨号的log，其他并没有呢，
你有其他的现象或者设定档在补充一下

有事您说话

断线情况可能还会出现在运营商，但是线路有问题，当运营商修复之后，你之前连接的记录还在，所以导致你无法上网，一般重拨就可以解决。之前有碰到过这一的情况，打客服电话，客户说我这拨号正常，要我重拨，后来就好了。
你可以再留意看看是不是固件有Bug

181221

非常感谢两位大大的解答，接下来我还会观察下是否还有断网的情况，如果有断网，我会再把断网时的日志发上来。

181221

涵哥 发表于 2017-3-6 08:40
这里面只有一次拨号的log，其他并没有呢，
你有其他的现象或者设定档在补充一下 ...

涵哥你好，有一个奇怪的现象就是，明明是网络已经断开了，网页无法打开，在网络地图中看到的互联网状态是已联机，你要求的设定档补充一下指的是那个选项，能否发图指引下，谢谢。

涵哥

181221 发表于 2017-3-6 09:55
涵哥你好，有一个奇怪的现象就是，明明是网络已经断开了，网页无法打开，在网络地图中看到的互联网状态是 ...

设定档是在初始化那个页面导出当前的设定档的。
根据你的补充，感觉是WAN那边的IP在release/renew导致的，你先检查一下物理连接，然后让运营商重置一下你的网络端口试试

181221

涵哥 发表于 2017-3-6 10:23
设定档是在初始化那个页面导出当前的设定档的。
根据你的补充，感觉是WAN那边的IP在release/renew导致的 ...

涵哥，明白你的意思了，这两天我先观察下，是不是还会出现这样的情况，物理连接检查过了，没有问题，发现断网后，看了下光猫的指示灯都正常，直接登录路由器重拨号就恢复了，我到时再把设定档和日志一起上传到论坛，谢谢你的耐心解答，非常感谢。

涵哥

181221 发表于 2017-3-6 19:21
涵哥，明白你的意思了，这两天我先观察下，是不是还会出现这样的情况，物理连接检查过了，没有问题，发现 ...

ok，收到